Marc H

Steve, it’s about a year since you first started this thread.  Did you ever upgrade this PP1 model you began with?  Which vise are you using now?  Knowing that will help us understand why you’re having difficulties removing knives then re-clamping them back to the same position.

The alignment guide or the advanced Alignment Guide is useful to gi…[Read more]

No disrespect meant…what do you want your microscope to do?  For me it’s a magnifying visual aid to help me to sharpen my knives with my W.E.  My scope let’s me see where my scratch patterns are being laid down so I can better assess my sharpening progress.  It just takes a quick glance.  A spot check that I’m doing what I want to do cor…[Read more]

Of the two Shapton stones, the more expensive, Shapton Glass Stone sets are my preference.  The same eBay guy made those sets for me too.  He also made me several other sets of other brands of whetstones.   I haven’t used all my different whetstones sets with enough of a variety of steels types to be able to correlate steel hardness with a pre…[Read more]

I use pressure commensurate with my sharpening mediums for the job I’m doing, at the time.  If I’m scrubbing at the start of a reprofile I’ll use more applied pressure and as I get the steel removing as I’m wanting, I’ll back off on the pressure.  I reserve the “light tough” for the lighter, finer grits when I’m into the polishing stage of my s…[Read more]

BIll_NYE, it appears from your photos you have been provided the wrong vise model/version, the one that should have been be shipped with the Gen 3 Pro setup. That wrong vice is flat on the bottom.  Oher then the flat base the vises are identical in their functionality.

The vise for your WE130 model is notched to inset and lock into the blue…[Read more]

Yes, the files do work.  But what they tell you is purely subjective, and speculative.  You’ll make of it what you want.  Interpret them as you wish.

Without scientific controls, and standards everything else is strictly academic.  Really just a hope or a guess.  Open to personal interpretations.  When your results and my results differ they’…[Read more]

The functionality of these files as a hardness testing method is purely subjective.  The qualitativeness, quantitativeness and accuracy of their resulting hardness readings are closer to “horseshoes and handgrenades” where “a miss is as close as a mile” and doesn’t really mean anything.

Yes HRc 65 is harder than HRc 60, just like $5 is more than…[Read more]

I started many years ago with the Pro-Pack II.  Then as W.E. offered new models, versions and design upgrades I tried them, too.  As I got deeper into my knife sharpening and knife collecting hobbies I learned the advantages and shortcomings of each of my sharpeners.  I customized, modified, adapted and accessorized each setup model to better ac…[Read more]

Yes it’s just like my lighter beige/gold granite.  It’s a nice looking piece of stone.

Welcome to the W.E. forum Sharpnew.

Here’s another option for stone storage when portability and an enclosed box aren’t necessary:

https://knife.wickededgeusa.com/forums/topic/we-stone-racks-for-sale/page/13/

SpensiveHabits, welcome to the W.E. forum.

W.E. sells through their inventory and they sell out often,  I doubt they have any new old stock.

At one time they offered what was called a paperwood base.  I think it was an MDF like product.  These bases were a milk chocolate brown color.  The paperwood bases were solid, hard and heavy but easily dis…[Read more]

Henry, I believe you have a couple issues going on there…

First, like you said, the diamond stones may not be fully broken-in yet.  I think you’ll continue to see further improvement in the resulting scratch patterns with continued use.

Then it appears your technique may need more practice and ultimate improvement.  Although it’s a little d…[Read more]

Mike R., it’s all part of the learning curve to using the W.E. well.  And yes,, that can be both disappointing and frustrating.  Positioning and clamping some knives securely can be very challenging.   Especially since there are so many different sizes, shapes and styles of knives.  Even after years of sharpening experience with my W.E setu…[Read more]

Welcome to the W.E.  Forum, Terry.

This is a handy adapter many of us use for similar situations.  The W.E. Low Angle Adapter is another helpful accessory.

Yes, the Resin-bonded Diamond Matrix Stones are still in my arsenal.  I can’t report any more details than I already posted earlier in this thread.

These Resin-Bonded Diamond Matrix stones have their pros and cons:

Pros:

• they don’t have any real break-in
• they don’t shed diamond dust like the W.E. stones do (during beak-in)
• they work…

[Read more]

https://knife.wickededgeusa.com/forums/topic/2000x-microscope/

Don’t misunderstand me.  The clarity is there with this scope.  When used properly, you’ll be able see the edge damage, defects and it’s condition when first clamping up the knife to decide your plan of attack. You’ll be able to see damage as small as pin point size chips and scratches.

Once I get started, for me, it’s all about my progress t…[Read more]

Just for inspecting knife edges for condition and sharpening progress the polarizing feature is really unnecessary.  Your not really examining the steel.   Your scanning the bevel to see the effectiveness of your technique to lay down scratch patterns.

The least expensive scope I ever purchased is still my go-to favorite.  It’s simpler and les…[Read more]

Alex, I believe about a 3° to 5° bevel profile difference is where a discernable cutting difference is recognizable.  I suggest a noticeable improvement in the cutting quality indicates there’s been quite a change, made.

An objective accurate sharpness tester is really needed to quantify an edge’s sharpness.  Testing an edge before and after sha…[Read more]

For knives with bevels that are inconsistent or indiscernable the Wicked Edge is used to profile the knife edge to bevel angles of your choice.

A bevel angle is chosen that is appropriate for the knife’s use, size, design and steel type.  You may be able to research the knives on internet for their specs.  The W.E. is then set up to that angle o…[Read more]