Basic Techniques and Sharpening Strategies

This forum has 400 topics, 3,664 replies, and was last updated 03/09/2025 at 4:25 pm by Ribstabsheart.

Viewing 15 topics - 91 through 105 (of 400 total)

← 1 2 3 … 6 7 8 … 25 26 27 →

- Topic
- Voices
- Views
- Posts
- Raising a burr
  Started by: Chuck
- 8
- 2607
- 13
- 04/25/2019 at 4:32 pm
  Expidia
- New to WE, angle issues
  Started by: Roy
- 4
- 1652
- 10
- 04/19/2019 at 9:40 am
  Marc H (Wicked Edge Expert Corner)
- Breaking in the stones
  Started by: Chuck
- 4
- 1507
- 6
- 04/17/2019 at 10:22 am
  Marc H (Wicked Edge Expert Corner)
- Experienced sharpener, can\'t get a good edge with WE
  Started by: Roy
- 4
- 1840
- 6
- 04/07/2019 at 8:36 pm
  Roy
- What angle for which Knife?
  Started by: Marc H (Wicked Edge Expert Corner)
- 3
- 1496
- 3
- 03/09/2019 at 8:30 am
  Expidia
- Single bevel knife .. how to sharpen it?
  Started by: airscapes
- 3
- 2045
- 8
- 03/08/2019 at 2:14 pm
  airscapes
- Blade Angle Help Needed…
  Started by: NorCalQ
- 1
- 823
- 1
- 03/03/2019 at 3:00 pm
  NorCalQ
- New Small Sebenza 21… To me! Sharpening Questions
  Started by: YerrowEdge
- 3
- 1774
- 4
- 02/16/2019 at 7:04 pm
  Organic
- tormec adapter getting the balde straight
  Started by: DeeR
- 5
- 1317
- 5
- 02/08/2019 at 6:03 pm
  Bill Kirkley
- knife with almost no edge from the manufacturer
  Started by: Michael Blakley
- 4
- 1117
- 4
- 02/01/2019 at 8:52 am
  NorCalQ
- Grit angle change 1 2 3 4
  Started by: Drew
- 5
- 6335
- 49
- 01/15/2019 at 1:49 pm
  NorCalQ
- Small chip near tip . . . Best plan of attack? 1 2
  Started by: Expidia
- 6
- 3101
- 25
- 12/31/2018 at 11:05 am
  Expidia
- Bubba Blade
  Started by: Steve
- 5
- 3775
- 8
- 12/31/2018 at 5:12 am
  Steve
- Best way to get a tip pointier?
  Started by: Expidia
- 2
- 1407
- 3
- 12/30/2018 at 12:43 pm
  Expidia
- The advanced alignment guide: what am I doing wrong? 1 2
  Started by: phillyjudge
- 5
- 4366
- 18
- 12/09/2018 at 7:35 pm
  Marc H (Wicked Edge Expert Corner)

Viewing 15 topics - 91 through 105 (of 400 total)

← 1 2 3 … 6 7 8 … 25 26 27 →

You must be logged in to create new topics.