Organic

Yes it’s just like my lighter beige/gold granite.  It’s a nice looking piece of stone.

Welcome to the W.E. forum Sharpnew.

Here’s another option for stone storage when portability and an enclosed box aren’t necessary:

https://knife.wickededgeusa.com/forums/topic/we-stone-racks-for-sale/page/13/

SpensiveHabits, welcome to the W.E. forum.

W.E. sells through their inventory and they sell out often,  I doubt they have any new old stock.

At one time they offered what was called a paperwood base.  I think it was an MDF like product.  These bases were a milk chocolate brown color.  The paperwood bases were solid, hard and heavy but easily dis…[Read more]

Henry, I believe you have a couple issues going on there…

First, like you said, the diamond stones may not be fully broken-in yet.  I think you’ll continue to see further improvement in the resulting scratch patterns with continued use.

Then it appears your technique may need more practice and ultimate improvement.  Although it’s a little d…[Read more]

Mike R., it’s all part of the learning curve to using the W.E. well.  And yes,, that can be both disappointing and frustrating.  Positioning and clamping some knives securely can be very challenging.   Especially since there are so many different sizes, shapes and styles of knives.  Even after years of sharpening experience with my W.E setu…[Read more]

Welcome to the W.E.  Forum, Terry.

This is a handy adapter many of us use for similar situations.  The W.E. Low Angle Adapter is another helpful accessory.

Yes, the Resin-bonded Diamond Matrix Stones are still in my arsenal.  I can’t report any more details than I already posted earlier in this thread.

These Resin-Bonded Diamond Matrix stones have their pros and cons:

Pros:

• they don’t have any real break-in
• they don’t shed diamond dust like the W.E. stones do (during beak-in)
• they work…

[Read more]

https://knife.wickededgeusa.com/forums/topic/2000x-microscope/

Don’t misunderstand me.  The clarity is there with this scope.  When used properly, you’ll be able see the edge damage, defects and it’s condition when first clamping up the knife to decide your plan of attack. You’ll be able to see damage as small as pin point size chips and scratches.

Once I get started, for me, it’s all about my progress t…[Read more]

Just for inspecting knife edges for condition and sharpening progress the polarizing feature is really unnecessary.  Your not really examining the steel.   Your scanning the bevel to see the effectiveness of your technique to lay down scratch patterns.

The least expensive scope I ever purchased is still my go-to favorite.  It’s simpler and les…[Read more]

Alex, I believe about a 3° to 5° bevel profile difference is where a discernable cutting difference is recognizable.  I suggest a noticeable improvement in the cutting quality indicates there’s been quite a change, made.

An objective accurate sharpness tester is really needed to quantify an edge’s sharpness.  Testing an edge before and after sha…[Read more]

For knives with bevels that are inconsistent or indiscernable the Wicked Edge is used to profile the knife edge to bevel angles of your choice.

A bevel angle is chosen that is appropriate for the knife’s use, size, design and steel type.  You may be able to research the knives on internet for their specs.  The W.E. is then set up to that angle o…[Read more]

Alex your pretty much on track with sharpening results and outcomes many new W.E. user’s seem to follow if they’reserious about it.

The process seems to go sort of like this…since, you now have the W.E. knife sharpeners you can position and clamp a knife rigidly, stationary and predictably.  These fixed angle sharpeners then let us sharpen our…[Read more]

A second video in this series has been released to W.E. subscribers:

https://www.youtube.com/watch?v=4uozHHgUqUI%5B/embed

I want to add there is a subtle difference between “finding the sweet spot” and “determining the bevel angle(s)”.  The process is roughly the same.  First it’s best to use the marker test to position the knife for clamping in i…[Read more]

There are so many different steels, knife makers and knife kinds and styles that after years using my W.E. setups despite my sharpening experience and knife familiarity that is still the case.

First I ever heard of this “Gunny Juice” product.  I do prefer the W.E.  Spray diamond emulsions to the W.E. strop pastes.  The feel of the emulsion products when stropping is improved, (smoother), along with the improved ease of application and the longevity on the leather while using.  The paste are dryer when attempting application and they mor…[Read more]

Nice efforts and results.  Welcome to the W.E. forum and W.E.P.S. Community, Alex.

What you have learned with your sharpening experiences is why many of us have chosen to customize, modify and accessorize our setups to personalize them to allow us to better clamp and sharpen our knife collections.  With practice and experience you will learn h…[Read more]

Keep at it James.  When you see your edges are improving, you’re on the right track.  Don’t be afraid to use each grit thoroughly before moving on to the next finer grit stone.  More time and effort with each stone is far better than not enough.  When in doubt, more is better.  You can’t overdo it.  Consistency,  effort and attention to detail…[Read more]

Kjosn,  I always finish every knife I sharpen with at least the 4µ/2µ strop pair.  This gives me a good balance between sharpness, smoothness and polish.

With the knife positioned as you have it, with the midpoint centered in the vise, try rotating the tip up and the handle down as the spine stays resting on the rear pin only of the depth key.  Rotate the tip up just slightly then repeat the sharpie test as you zero in on the right amount of rotation.