Jake M

It depends on the knife along with the situation.

For instance, a knife that is ground to be an “uneven grind” does have a centered knife edge. All of my right-handed, RH 70/30 Japanese knives have slightly different shaped primary grinds on each side of the knife, along with uneven bevel heights. But the bevel angles are similar. (Since many are…[Read more]

For more discussions like this thread, I invite you to join my Facebook Group:

https://www.facebook.com/share/3RH5rp3MVMLd1MZp/?mibextid=A7sQZp

Nor have I in a very long time.

Here is one of several videos I produced discussing the matter. I Invite you to join my FaceBook book in order to view the material:

https://www.facebook.com/100037733645164/videos/1076690956841227/

Jende has a new round diamond set coming. I’m working with Jende to adapt these round rod diamond stones for WE use.

Ecoboe

This is what Tom Blodget responded. He produced that video. I just linked him your forum original post.

“ok, so the only real way to get the inside of the scoop is to getthe stone inside. Your’e looking at a rod of sorts with sandpaper or film. The bevel on the rest of the knife should be straight forward. It can get weird if its a scandi…[Read more]

This is all I can offer for those types of knives:

https://www.facebook.com/groups/683248253138189

Welcome to the Wicked Edge Forum and sharpening community, Willie.

I believe they may have customized previous model cases they sold.  Original idea was the case was shipping crate but very large and expensive shipping.

I believe my G4P pedestal model came in an adapted case for that reason.

Different usable cases are easy to source. But, since the G4P is a new model, that is offered in different options/configurations, you will probably need to customize the foam insert yourself. There are different foam sources that can be used and customized to your needs. Good luck.

That’s why I started the the Expert Corner Group. But, not everyone is comfortable with that form of interaction. I’ve amassed some good info in the FBG. Enjoy your viewing. I’m told 2x speed helps. I talk alot.

Nothing is spring loaded. Nothing goes flying.

https://www.facebook.com/share/v/M1phiHa1F12bA9Zr/?mibextid=oFDknk

Yes, this is an available option that works well. I have a riser on every WE model.

Allow me:

Yes, you’re vise-proportion observations between the WE120 and WE66 models and the shortcoming is dead on correct. The reason for the value to keep the two different models.

You can either augment the new shorter WE66 on the top with a WE LAA or on the bottom by elevating the vise with a riser block installation. With a riser block I can achieve…[Read more]