Marc H

-Kiku-

Based on my experiences with W.E. brand products, W.E. does not delineate “versions” for their various models.  There are indeed differences that may been seen by experienced users.  Some of these difference may be with internal parts though and not determined without disassembling.

I’m suspecting your issue is an eBay nomenclature.  If…[Read more]

sold

sent you private message

Regis, this is simply a “concept design” project. An idea to overcome difficulties sharpening long or large knives with my I experienced with my W.E. setups.  It is simply two WE130 models used in tandem, one behind the other so both vises can clamp the same knife and be used on that same knife.

How it’s actually engineered or constructed is not…[Read more]

My voice of reason says always sharpen a knife, for the first time, to emulate the maker’s edge profile.  Experience for yourself how the maker’s design behaves with a well applied and well sharpened Wicked Edge.  Then use it, enjoy it and scrutinize it.  Put some thought into it with future plans to reprofile the knife edge.  Don’t just rep…[Read more]

An angle cube stores the last or most recent zeroed-out value or reading, whether it’s on or powered off.  It will hold that value until it’s zeroed out again.  The proper way for using the angle cube is to set all your angles relative to the same zeroed-out meter value, start to finish, for that knife.  Then each stone/grit in your sharpening pr…[Read more]

I work with the USB scope on high power so I look at a very small portion of the bevel, maybe only a 1/4″ width section and usually the full height of the bevel.  I prefer to view the bevel from the side, 90° to it.  Others users prefer to look straight down onto the edge or apex from above it

I also work at a low resolution setting.  Only 800…[Read more]

I will add…a lighted, magnified, visual aide, (I prefer a USB Microscope) will allow you to inspect the consistency of your stone work, (that word again), to see exactly where the resulting scratch patterns are being laid down across the full height of your bevels.  An application/reapplication of a sharpie marker across the bevels, also helps…[Read more]

Wicked Now.

There are many factors that may contribute to the relatively small (0.1-0.2°) angle change (increase). First consideration is your consistency.  Every thing has to be the same and stay the same. Are you measuring the angles consistently?  I assume you’re using a digital angle cube.  Are you using a properly zeroed cubed?  Only zero…[Read more]

I just completed this small rectangular, 16 post “Table-Top Rack-It” model for a new W.E. user and forum member.  It’s packed for mailing this week.

It is not necessary to be “logged in” or “signed in” to have “read-only” access for the W.E. Forum or for the W.E. website.  If you want to contribute or participate in the W.E. forum by posting a new topic or replying to an existing topic you do need to be registered and logged in or signed in to the forum.  Also, to “contact the W.E. Company” o…[Read more]

Welcome to the W.E.  forum, “Wicked Now.”

Simon, are you positioning the LAA so it is all the way down between the jaws so the adapter is physically contacting and resting on the top horizontal surface of the jaws.  Also the vertical sides of my LAA are close or in contact with the vertical sides of the jaw set.

Positioned like this I have no wobble.  The LAA is stable and secure.   H…[Read more]

Welcome to the W.E.  forum Simon H.

A super mirror polish can be achieved with different combinations of abrasives.  It is the culmination of a long repetitive, organized process.  Not just something you can produce from using a particular medium.

First, like with any kind of highly refined finishes, like wood work or auto body finishes, it’s al…[Read more]

Welcome to the Wicked Edge Forum, A T in AZ:

The Forum seems to have lost some of it’s functionality when we switched over from our previous host to this current one. Maybe if you could share the site quirks that are hindering your navigation we may have a work-around that may help you.

Gene Robbins, to answer your question…

Per Clay: “We will be releasing an upgrade for the original WEGO 50 Series which will allow those users to install the new ParaCam vise. They will not be able to add the Lead Screw Angle Setting.”

(no time frame was shared).

Welcome to the Wicked Edge Forum, Ron.  I use strops as my my finishing steps for every kind of knives I sharpen.

The Knowledge Base is a great place to start with for finding answers to your new user’s basic sharpening questions:  https://support.wickededgeusa.com/portal/en/kb/articles/leather-and-balsa-strop-instructions

There are also many h…[Read more]

I just completed, packed and sent off this 36 Post Step Tiered “Rack-It” to another new W.E. forum participant.  This model can be used just as well both sitting flat on a table top or hanging on the wall.

I recently completed and shipped these two smaller capacity “Rack-Its” models to new W.E. users: