cmyhero
-
cmyhero replied to the topic Gen 4? in the forum Main Forum 4 years, 2 months ago
if I was to guess the beads are 5mm unless they make a 5.5mm as the thumb screw seems to be 6mm??
-
cmyhero replied to the topic HELP in the forum Basic Techniques and Sharpening Strategies 4 years, 2 months ago
Wow MarcH you have answered a question I had as well.. I was practicing on a cheap knife and it was bending with the slightest pressure so I tried the KO Worksharp and was having difficulties so I took it to my old ChefsChoice XV and in about 5 minutes I had a hair shaving edge which I stropped with the pre “seasoned” knivesplus strop to further…[Read more]
-
cmyhero replied to the topic Gen 4? in the forum Main Forum 4 years, 2 months ago
I spoke to Kyle and he sent me some small plastic bearings that I put in the adjustment area and no more problems with coming loose.
-
cmyhero replied to the topic Spyderco Para 2 in the forum Knife Photos 4 years, 2 months ago
How can a knife using the alignment guide not rest on any part of the pins either front or rear.. I thought we were to use the guide with the tip or the knife equaling the referencen point? Boy I have a lot to learn and I appreciate your teaching. By the way are there any knife sharpening services on this forum that only use Wicked Edge as their…[Read more]
-
cmyhero replied to the topic Spyderco Para 2 in the forum Knife Photos 4 years, 2 months ago
Thank you as I was wondering why Clay let it fall to a slanted position using the top holes I understand horizontal alignment with top of vise but how do you do vertical since it is slanted and not rectangular?
-
cmyhero replied to the topic Spyderco Para 2 in the forum Knife Photos 4 years, 2 months ago
With the advanced sharpening guide are we to let it dangle as Clay has here or are we to straighten it so it is level with the jaw edge of the Gen 3 ?
-
cmyhero replied to the topic Conversion from Original to Advanced Alignment in the forum Basic Techniques and Sharpening Strategies 4 years, 3 months ago
Marc, it seems you have been with the WE less time than me but you are so advanced unlike myself. My ORIGINAL alignment guide was a strip made out of metal looking nothing like your original that looks like a modified sheet. Thus I do not understand the conversions based on your images. ty
-
cmyhero started the topic Conversion from Original to Advanced Alignment in the forum Basic Techniques and Sharpening Strategies 4 years, 3 months ago
Is there a chart or formula that I can use to convert from original to the advanced alignment guide.
Currently I am needing the conversions from
B.O
B.5
But it would be great to be able to convert any of the original into advanced alignment..
-
cmyhero replied to the topic manix 2 Advanced Alignment Guide Pro 3 in the forum Techniques and Sharpening Strategies 4 years, 3 months ago
marc seems exactly as you are saying.. I am now trying to get as even as possible angles and I have the bevel looking similar and on one side there is an excellent burr but on the other side I seem not to be able to get a burr at all and I do not know why. The marker is being completely removed from the top of the edge and down the side a bit such…[Read more]
-
cmyhero replied to the topic manix 2 Advanced Alignment Guide Pro 3 in the forum Techniques and Sharpening Strategies 4 years, 3 months ago
Marc I am so very frustrated how can the right side be so different than the left.. I am ready to quit trying with this costly knife before it maddens me.
-
cmyhero replied to the topic manix 2 Advanced Alignment Guide Pro 3 in the forum Techniques and Sharpening Strategies 4 years, 3 months ago
Thank you Marc… what does B.25 equal with the advanced alignment guide?
-
cmyhero started the topic manix 2 Advanced Alignment Guide Pro 3 in the forum Techniques and Sharpening Strategies 4 years, 3 months ago
What is are the sharpening parameters for the Manix 2 using the Pro 3 ?
-
cmyhero started the topic uneven burr sizes.. in the forum Techniques and Sharpening Strategies 4 years, 3 months ago
I am trying..now 8th time to sharpen a maxamet manix 2 and I have a burr easily felt on one side but it is so hard to get one on the other side although I think I have a very small burr alo0ng the entire length. What is happening here using a pro 3 unit? I have had no trouble with other blades but this is so frustrating..
-
cmyhero replied to the topic advanced alignment guide pro3 2017 manix 2 in the forum Getting Started 5 years, 6 months ago
Marc..I do not have anything than the advanced guide..how does it compare to original ?
-
cmyhero started the topic advanced alignment guide pro3 2017 manix 2 in the forum Getting Started 5 years, 6 months ago
Using the advanced alignment guide in a 2017 pro 3 what should be the address for the manix 2 including upper or lower hole placement?
-
cmyhero started the topic Endura 4 VG10 Hair whittling on 2 Micron Diamond Paste.. Go further?? in the forum Techniques and Sharpening Strategies 6 years, 10 months ago
I have been working on a Endura 4 VG10 and it is hair whittling after 2 micron diamond paste and is there any reason to go further than that…, i.e., will it get still sharper and if so how can I quantify its sharpness?
-
cmyhero replied to the topic Reprofiling s110v PM2.. How long should it take -hair whittling in the forum Techniques and Sharpening Strategies 6 years, 10 months ago
Yes thank you, the reason I went back was because scratches were not being removed so I went backwards until I got to the 80 which I thought was necessary to remove the 50 that were from the KME. I thought this was necessary as I was told when starting 18 months ago that I need the next smaller grit to erase the previous scratch and I could not…[Read more]
-
cmyhero started the topic Reprofiling s110v PM2.. How long should it take -hair whittling in the forum Techniques and Sharpening Strategies 6 years, 10 months ago
I have been working now the 3rd time trying to get a hair whittling edge which I achieved today but what a mess.. too many scratches in the bevel. What I would like first of all is to know how long on a WE should this process be to have no visible scratches upon completion of a s110v PM2 and to get a hair whittling edge. I do not care if the…[Read more]
-
cmyhero replied to the topic How do you stop angle adjustment Pro3 2017 loosening in the forum Techniques and Sharpening Strategies 6 years, 11 months ago
Thanks I called today and they did not have a part number so could not send today but I believe they will have what is needed shipped tomorrow or next day.
-
cmyhero replied to the topic How do you stop angle adjustment Pro3 2017 loosening in the forum Techniques and Sharpening Strategies 6 years, 11 months ago
Hi I am not sure as I am talking about the Pro 3 2017 and it has a cam for angle adjustment
- Load More