Chazz

Welcome Chazz,  I’m west of you on the gulf side of Tampa Bay.  Sitting here sharpening a friends fish fileting knife on my WE130.

I suggest the Pro Pack III.  It’s the WE130 with everything you’ll need to get started and do top notch jobs.  There’s more then that which is included, you may want later, but that’s a great introductory setup.  I’ll…[Read more]

IMO, with persistence, ingenuity and Google.com anything can be found!

https://www.amazon.com/dp/B000FTQOKG/?coliid=I2DKET9FZVRJ71&colid=2ESJFZOUGVCS2&psc=1&ref_=lv_ov_lig_dp_it

Amazon .com  and Google.com   are two great sources for a world of information for modding our Wicked Edge Set-ups

Danny I sent you PM’s

Yes the Shaptons Glass Diamond Stones for Wicked Edge are discontinued.  But I did think Bob has the Shapton Pro Stones.  I had bought those from him and used them in the past.  They are very good stones especially for harder steels.

Danny, Welcome to the W.E. forum and the W.E. community.  I have purchased Shapton Stones from http://www.oldawan.com/  recently.  I believe the Pro stones are available.  Check with the owner, Bob, he’s very helpful and a pleasure to do business with.

Just completed the build and mailed out this Medium 24 Post Rack-It for Forum member “Mike”.  It’s a Rigid Hybrid Model.  This model can be used on the table top or when it hangs on the wall:

Like Tom’s, my 2200/3000 grits aren’t broken in yet.  If they come around, when they are finally broken in, and behave as well as the original 1500 grit diamond stones do, then I look forward to what they’ll bring to an all diamond stone progression.

Nobody can tell you whether the investment is worth it to you, Justin.  Only you know exactly w…[Read more]

Justin, the tendency I see is that sharpeners try to do is lump all the different mediums together in one lone progression.  They want to use everyone of their stones to sharpen and then polish the knife.  The problem is that the different medium’s grits are often classified and rated by different scales so they don’t necessarily compare and fit t…[Read more]

I have used a new 0.243/6 bronze brush to clean the paddle bore holes of injection molding or glue debris on new paddles that are binding on the guide rods.  It always worked well and did no damage.

I tie some kind of strong string in a circle that when flattened is like 12″ long.  Then I loop a strip of gun rag like 4″ x 1/2″  folded over the string.  I hook an opened and flattened paper clip over the string loop to serve as a narrow weight and drop that clip down through the paddle hole.  Then grab the paper clip and the string loop at the…[Read more]

If my guide rods feel dragging,  that is, if the sharpening stones are not sliding as freely as they once had, I wipe the guide rods down with a silicone impregnated “gun rag”.  I also check to verify the guide rods are screwed down hand tight into the guide rod ball joint ends.  I also will pull a small strip of the gun rag, on a string, th…[Read more]

Welcome to the Wicked Edge Forum DCXLII

The WEGO is a very precise and versatile sharpening device and an economical entry level alternative as you have learned.

There is a specific forum for WEGO users: https://knife.wickededgeusa.com/forums/forum/wicked-edge-go/  although it has only seen limited participation.  The sharpening principles and…[Read more]

rummels,  sharpening is a repetitive process fo me.  Grit after grit I repeat the same routine with the same technique again and again.  The culmination of the repeated steps yields my sharpened edge.  This you know.

I test the knife edge with each grit for sharpness.  First, as I believe I’m making progress I test the edge for sharpness with…[Read more]

Whetstones like Choseras and Shaptions don’t need a “break-in” period.  They do however need to be maintained for trueness and flatness by lapping on a plate.  They are also consumable and they can break if dropped.  Whetstones are more expensive.  They do need to be used with water; thus the namesake.  Everything has a positive and a negat…[Read more]

Welcome to the Wicked Edge Forum Casey.  We Forum regulars are always happy to see a new Wicked Edge users and to help facilitate the purchase whenever possible.  Many users have purchased their set-ups from eBay.  If you find one there, I suggest you post the eBay link here on the forum so we can  have a look at it and help you determine if tha…[Read more]

I like to set up my two adapters on both stones to start.  Then I just swap the cube from side to side.  This lets me quickly double check my angles if I want to without having to remove the one adapter and swap it from side to side.

For me swapping out the stones as I progress through the grits, double checking guide rod angle settings and m…[Read more]

Here’s one more helpful link to check out Brewbear: https://blog.knife-depot.com/15-knives-with-unique-opening-mechanisms/

or is a knife that the handles split and fold back on themselves like this Barry Wood Tuckaway by Frost Cutlery: