Danny

I bought the WE Pro and love it with the knives I sharpen  I just recently bought the Tormek T-8 so I can sharpen still bits axes e ct. that I can not do on the WE.  I have found the re-profiling with the tormek is a lot faster and then finishing on the WE makes the whole thing go much faster.   The only thing I need for the tormek is the Jap…[Read more]

Got it done.  Not all pits came out but I didn’t want to take to much. Gave a good sharpening only to 600 grit at 18°.  Looks a lot better. Got another two projects coming. Old case knives that I got at a sale.  Can’t wait to start on them.

It’s starting to look like a useable knife again.  Still have some work on it but didn’t have time last night. Got home a little late.

That was my thinking also.  A good time saw with a diamond blade.  I have laid lots of time and have used a wet saw for many years.  I am going to order some of wetstones and oil stones to put on blank handles.  One stone usually is around 8″ x 2″ so I can get two blanks and two stones to make the complete set.

I’m just going to put this out there about customer service.  They are EXCELLENT.  Got ahold of Clay by email after unpacking one of my ceramic stone sets to put into my rack it that I got from MarcH.  As soon as they came out of the plastic, both sides fell out of the handles.  Glue didn’t stick at all.  Clay gave me an email right back and had…[Read more]

Thanks for that Marc.  I was reading how to do it on the knowledge base but now I just watched the video and that is exactly what I want to do to my buck knife.  Thanks again.

Thanks brewbear  I am working on my buck knife had some surface rust on it super eraser took it off like a charm. Sharpening it right now with a 16° bevel and I’m going to  convex the edge to 18°.  It chips to easy at 16° which is the way it came from factory, so hopefully convexing the bevel will help it out.  Got to 1500 last night but ran ou…[Read more]

Thanks for all the input. Was just thinking about it because I have actually watched the video a couple of times.   Probly will just stick with cleaning with a soft brush and some dawn.  Also the alcohol spray.  Thanks again.

Thanks for the reply  I have read the care and maintenance on the stones  I was just trying to get some input on the ultrasonic cleaning of stones.

Thanks

Forgot the super eraser worked great.

Well got my case knife cleaned up and sharpened the second blade  went from 100 grit to 1500 then 5 micron to 3.5 micron paste on leather.  Turned out pretty good. Getting the hang of it.

Got my rack it from MarcH on Monday. Loaded all up and ready to go. Looks great and works great.  Thanks MarcH.

Very good info on video. Thanks MarcH

Thanks Marc  I am going to clean it myself  just got two of the super erasers.  Needed one for my ceramics anyway.  Thanks.

Yea i s my personal knife. Don’t want to screw it up even though it is mine.  Can’t find anything on you tube opt anywhere to take one apart. Only thing I see is ship it to case manufacturer.