Glenn Goodlett
-
Glenn Goodlett started the topic Any tips on sharpening a Sandrin tungsten carbide blade in the forum Techniques and Sharpening Strategies 1 year, 10 months ago
My Sandrin Monza finally got somewhat dull. I tried following the best I could the instructions on their website on sharpening. The best I could get was a BESS of 370. Upon inspection with a microscope the edge looks chipped out pretty badly. Any ideas would be appreciated. I have a WE 130 with diamond stones, lapping films, etc.
-
Glenn Goodlett replied to the topic Anyone know anything about this Laser Edge Finder on Amazon in the forum Techniques and Sharpening Strategies 3 years, 9 months ago
I have one of these
Laser Edge Goniometer Master+ – Gritomatic
It seems to match up pretty well to what the WE says.
-
Glenn Goodlett replied to the topic How sharp can a 20 dps blade get? in the forum Techniques and Sharpening Strategies 4 years, 6 months ago
I recently sharpened a knife at 18 dps and didn’t have any trouble getting it down to a BESS of 120. I feel sure that if I ran one down to 15 dps I could reach sub 100 with a little effort.
-
Glenn Goodlett replied to the topic How sharp can a 20 dps blade get? in the forum Techniques and Sharpening Strategies 4 years, 7 months ago
Thanks, I didn’t realize they had to be broken in too. Is there a particular way to break them in or just use them normally? How long does it usually take?
-
Glenn Goodlett replied to the topic How sharp can a 20 dps blade get? in the forum Techniques and Sharpening Strategies 4 years, 7 months ago
So, the guy that sell the stones…is recommending more stones…
Just kidding
I just ordered some Micro-Fine ceramic stones.
Thanks for the tips.
-
Glenn Goodlett replied to the topic How sharp can a 20 dps blade get? in the forum Techniques and Sharpening Strategies 4 years, 7 months ago
I think I will do one at 16dps and see where it comes out.
-
Glenn Goodlett replied to the topic How sharp can a 20 dps blade get? in the forum Techniques and Sharpening Strategies 4 years, 7 months ago
I get what your saying. I got my Hinderer Full Track to a BESS of 240 then made four long cuts on a leather sofa (trash dumped in the desert) and now it won’t cut arm hair.
I am really just playing with the WE and killing time.
-
Glenn Goodlett replied to the topic How sharp can a 20 dps blade get? in the forum Techniques and Sharpening Strategies 4 years, 7 months ago
I think that I will explore the photo taking abilities of my microscope to better show what I have going on and get opinions.
-
Glenn Goodlett replied to the topic How sharp can a 20 dps blade get? in the forum Techniques and Sharpening Strategies 4 years, 7 months ago
Thanks for the tips. I always finalized each grit with edge trailing strokes, maybe that will help.
And I agree a BESS of 180 is not dull. I’m just mostly geeking out on sharpening.
Also, thanks for all of your knowledgeable input in this community. It has been a great help to me.
-
Glenn Goodlett started the topic How sharp can a 20 dps blade get? in the forum Techniques and Sharpening Strategies 4 years, 7 months ago
I have been trying to get a couple of knives super sharp, but don’t want to reprofile to less than 20 dps just so the edge is not so delicate. I run through the diamond grits 100, 200, 400, 600, 800, 100, 1500, 2200, 3000, then 6 micron film and finally strops from 4 to .5 micron.
The blades are no doubt sharp with a mirror edge but I can’t get…[Read more]
-
Glenn Goodlett replied to the topic marking the blade in the forum Forum Usability Notes and Requests 4 years, 7 months ago
I use an app to keep track of my knife collection and I put sharpening data in one of the fields as well as BESS numbers, etc. The app works pretty well and the data is on the cloud so it is available on my phone, ipad, and confuser…[Read more]
-
Glenn Goodlett started the topic Magnetized blade in the forum Techniques and Sharpening Strategies 4 years, 9 months ago
I just sharpened a knife in which the blade somehow became magnetized. I went through the grits but I think I may have been running filings over the edge. When done I still had a lot of scratches. I should have taken a photo but I didn’t. You could see the individual steel filings standing up on the edge. It was not dull by any means as it…[Read more]
-
Glenn Goodlett replied to the topic Sharpening copper beryllium blade in the forum Basic Techniques and Sharpening Strategies 4 years, 10 months ago
Dude, use extreme caution!
I don’t know anything, but, I copied this directly from Wikipedia.
In solid form and as finished objects, beryllium copper presents no known health hazard.<sup id=”cite_ref-:0_2-0″ class=”reference”>[2]</sup> However, inhalation of dust, mist, or fume containing beryllium can cause the serious lung condition, chronic…[Read more]
-
Glenn Goodlett replied to the topic New microscope in the forum Main Forum 4 years, 10 months ago
I never tried my microscope on a laptop however the directions say a usb cord must be used. On WiFi it seems to stay connected to my iPad mini 5 just fine so you can leave it on while sharpening. The only issue seems to be that the battery will only last about two hours. It did run down while I was sharpening several knives in a row so I plugged…[Read more]
-
Glenn Goodlett changed their profile picture 4 years, 10 months ago
-
Glenn Goodlett replied to the topic New microscope in the forum Main Forum 4 years, 10 months ago
I got this one. I think all the cheap wireless ones are about the same.
-
Glenn Goodlett replied to the topic New microscope in the forum Main Forum 4 years, 10 months ago
I got a microscope with a built in screen and it’s not worth a dam for knife sharpening. Then I got a wireless one that connects to my iPhone or pad and it works well. Both were cheap.
-
Glenn Goodlett's profile was updated 5 years, 6 months ago
-
Glenn Goodlett became a registered member 5 years, 6 months ago