My GO has been upgraded!
- This topic has 4 replies, 4 voices, and was last updated 05/19/2020 at 6:27 am by
.
-
I just completed a must do upgrade for the GO model sharpner. I changed out the current ball joints and added NotSharpEnuff’s Micro Angle Adjustment Kit and I also got the rubber boots to protect the balljoints.
If you want you angles to be for example 20° the Micro Adjustment Kit makes it a snap to dial in the exact angle and saves tons of time doing it.
The installation was straight forward and took no time at all.
I just thought I would share this information for anyone that doesn’t have Micro Adjusters on their sharpner.
-
This topic was modified 4 years, 9 months ago by
-
This topic was modified 4 years, 9 months ago by
5 users thanked author for this post.
Nicely Done!
1 user thanked author for this post.
I like your Innovation both “Tinyfish” and “NotSharpEnuff” with this “Micro Adjust” on a “Go”.
Nice Ingenuity.
1 user thanked author for this post.
Looks like a nice upgrade!
1 user thanked author for this post.
I saw the upgrade on the forum and I liked the idea of having the ability to dial in the exact number.
1 user thanked author for this post.
-
This topic was modified 4 years, 9 months ago by
- You must be logged in to reply to this topic.