Josh Berresheim

[Josh Berresheim]

Sweet!

[Josh Berresheim]

With some glass platens, leather and kangaroo platens, and micro fine platens, they should be here in a month or so, can’t wait.

Awesome!

[Josh Berresheim]

Benchmade 551

Hey Josh,

That looks awesome! Do you mind if I share it on Facebook?[/quote]

I would love that! Thanks Clay

[Josh Berresheim]

Benchmade 551

Attachments:

• image_2015-04-10.jpg

[Josh Berresheim]

I have been reading posts where guys were conditioning strops with sandpaper.

[Josh Berresheim]

I do use the angle cube. Maybe my ceramics are not totally flat?

[Josh Berresheim]

Thanks everyone! I just ordered the Carson loupe this morning. I also tried the lower grip last night and got great results to the 1000 grit. I think my problem is coming from the ceramics. I adjusted the angle with each stone and the ceramics as well. I have also lapped all my ceramics on the 200 grit stone but still looks like the bevel is not right. I can’t wait to use the loupe!!!

[Josh Berresheim]

Thanks so much guys. What kind of loupe should I look in to? I am probably a victim of rocking the stones over the edge. I will try the “below the edge” style. I have two sets of roo strops with 5 /3.5 .25 and .125 cbn coming. Also two sets of glass plates and 3 1 ,5 and. 1 film coming as well.

[Josh Berresheim]

Thanks Cliff. My main question was on the progression of the films and strops. I have the PP2 and my bevels are really reflective. I want a true mirror polish. What should my progression be starting with the film? Thanks in advance!

[Josh Berresheim]

Are the glass plates double sided? Do they have to be lapped? After lapping with. 1 film what strop material and diamond Spray/paste works the best for what I want?

[Josh Berresheim]

I am really looking for the super mirror polish and a tree topping edge. What grits of film do you guys suggest? Thanks for the help!

[Josh Berresheim]

Thanks so much guys! I did spend quite some time lapping my ceramic stones. I finally was able to flatten them out. I already have several people wanting me do do their knives. 🙂

[Author]

Posts