Eric F
@efaden
active 3 years, 2 months ago-
Eric F started the topic Filet Knife…. How do I mount it? in the forum Basic Techniques and Sharpening Strategies 6 years, 10 months ago
See the picture. It’s a REALLY narrow blade. I can’t seem to figure out how to mount it so I can sharpen it. Thoughts? Suggestions?
-
Eric F started the topic Is this normal for the ceramics? in the forum Abrasives 6 years, 10 months ago
See the picture. One is very… well.. holy…. Is this normal?
-
Eric F replied to the topic Dealing with the Bolster? in the forum Basic Techniques and Sharpening Strategies 6 years, 10 months ago
Thanks for the information. I got these knives a long time ago, and actually decided I would NEVER buy another knife with a bolster again because of it.
I think I’ll grind it down with the belt.
-Eric
-
Eric F started the topic Dealing with the Bolster? in the forum Basic Techniques and Sharpening Strategies 6 years, 10 months ago
Anyone have suggestions for sharpening this knife? The stone is hitting the bolster/finger guard and thus I can’t sharpen the end of the blade. I thought about using my work sharp/belt grinder to just grind down the bolster. Is there a better way? or a trick?
-
Eric F joined the group All Forum Members 6 years, 11 months ago
-
developer (ChrisB) and
Eric F are now friends 6 years, 11 months ago
-
Eric F replied to the topic Chips in Edge After Sharpening? in the forum Main Forum 6 years, 11 months ago
It was a draft… Then the kids went crazy and it wound up getting submitted, so I just blanked it out since I couldn’t deal with it at the moment. Nothing wrong with the forum… just toddlers running mad. And its fine to post it. Between this forum and the PMs I am actually getting the hang of this thing.
Thanks!
-
Eric F replied to the topic Chips in Edge After Sharpening? in the forum Main Forum 6 years, 11 months ago
Thanks for the help all.
-
Eric F replied to the topic Chips in Edge After Sharpening? in the forum Main Forum 6 years, 11 months ago
That sounds reasonable. Thanks.
-
Eric F replied to the topic Chips in Edge After Sharpening? in the forum Main Forum 6 years, 11 months ago
@Mark76 – I am pretty sure it wasn’t there at the beginning…. I think…. :-/…. Next on my list is one of those USB microscopes.
@MarkH – I said magnetic because the filings stick to things…. the edge included… looks like magnetic filings from high school physics/chemistry. I should actually just step it up to 20 degrees… this us…[Read more]
-
Eric F replied to the topic Chips in Edge After Sharpening? in the forum Main Forum 6 years, 11 months ago
Also interesting is I checked the blade after each stone on my last attempt. I don’t really recall seeing the chips until I used the ceramics….
The whole WE is new, so everything is still being broken in.
-
Eric F started the topic Chips in Edge After Sharpening? in the forum Main Forum 6 years, 11 months ago
So in an effort to learn how to use the Wicked Edge I asked my neighbors/friends if they had any knives I could sharpen. I got a bunch. I am having a problem with one of them. It is a junky santoku. The metal is odd, and seems to be magnetic. I set the angles (18 per side) and sharpened it up. Really sharp edge, but it had chips in it……[Read more]
-
Eric F replied to the topic Uneven Ceramic… in the forum Main Forum 6 years, 11 months ago
Sounds good thanks. I’m not sure I am good enough yet to tell whether or not it matters… 🙂
-
Eric F started the topic Uneven Ceramic… in the forum Main Forum 6 years, 11 months ago
Along with my WE130 I got the ceramic stones. I noticed that one of them is VERY uneven. I posted on facebook about whether this was normal and it seemed that most people said it isn’t normal, but shouldn’t matter. Figured I’d ask here also. Thanks!
-
Eric F replied to the topic Setting Angle (Bar Markings vs Angle Cube) in the forum Main Forum 6 years, 11 months ago
Thanks!
-
Eric F replied to the topic Setting Angle (Bar Markings vs Angle Cube) in the forum Main Forum 6 years, 11 months ago
Ah…. that makes sense…. I didn’t even think about that.
Thanks!
-
Eric F started the topic Setting Angle (Bar Markings vs Angle Cube) in the forum Main Forum 6 years, 11 months ago
I just got a WE130 and am trying to figure out how exactly to set the angle and am running into a weird problem. I first align the rod such that the inner edge of L bracket is at the line going through the 15 (… the 1|5 line). Which, theoretically, should be 15 degrees. I then attach the angle cube to the stone and it shows 14 degrees. Is…[Read more]
-
Eric F became a registered member 6 years, 11 months ago
