cliff58

[cliff58]

Already sold!that was quick

[cliff58]

Attachments:

You must be logged in to access attached files.

[cliff58]

Attachments:

You must be logged in to access attached files.

[cliff58]

Welcome Mike,I needed a good laugh today-stick around,you can learn a lot here-I know I have,a bunch of tips and good info.

1 user thanked author for this post.

Sharp1

[cliff58]

Bill that deer picture almost looks like I’m looking out my window,great pics!

[cliff58]

Follow up on the ZT 0770

1 user thanked author for this post.

Josh

[cliff58]

The pana vise set-up is the bomb!Way more comfortable,you can set the whole thing at any angle you want,thanks Razors Edge your tutorial video made it easy,Colin you should really give it a try.

[cliff58]

Base traded also-thanks guys!

[cliff58]

Great job!Hopefully I’ll be able to do that one day.

[cliff58]

Man you do some killer work!!

1 user thanked author for this post.

Josh

[cliff58]

The arms are spoken for-waiting to hear on the base,thanks

[cliff58]

tcmeyer-message sent

[cliff58]

I just got done doing this to mine-https://knife.wickededgeusa.com/forums/topic/the-wicked-edge-panavisesuction-cup-mod/

thanks to RE knives-if not you can make a pattern of your WE base by tracing it on paper,then turn it over after folding one of the long edges of the paper to hold it in place-then mark the holes on bottom of the base,I dont know how long of screws you will need,but they are 5-80 metric,you can get them in any configuration you like and they go into the base about 1/4″ so add that to the thickness of your desk-if I was able to do it I’m sure anyone can-good luck

1 user thanked author for this post.

wickededge

[cliff58]

Welcome Ranger from another newbie that is learning,getting better every day though!

[cliff58]

Thanks Clay!

[Author]

Posts