Hand plane blades

[Josh]

Hey the uploads are working again. Try another

with this second set up you could convex beauty shears to extremely low angles. You would just need a riser for that right joint, similar to what clay has come up with!

[cbwx34]

Looks like it needs to be a tad longer… but that looks pretty cool!

Like this one… simple but effective.

[Daniel maloon]

Convex. Few swipes at different angles

[Daniel maloon]

7″extra curved, sharp as the devil

[Mark76]

Wow! That looks great, Dan. Man, you are inventive!

Molecule Polishing: my blog about sharpening with the Wicked Edge

[tcmeyer]

I agree… Some very clever work-arounds!

Which brings up a question I’ve been meaning to ask. Will WE sell parts, as opposed to kits? Not too many of us have an extra ball-joint mount lying around.

Also, with me using my micro-adjusts as much as I do, I’m expecting that eventually I’ll need some replacements and I don’t expect WE to send replacements on warranty after five years. I can fabricate a lot of stuff, but I don’t have a key seater in my wood shop.

[wickededge]

I agree… Some very clever work-arounds!

Which brings up a question I’ve been meaning to ask. Will WE sell parts, as opposed to kits? Not too many of us have an extra ball-joint mount lying around.

Also, with me using my micro-adjusts as much as I do, I’m expecting that eventually I’ll need some replacements and I don’t expect WE to send replacements on warranty after five years. I can fabricate a lot of stuff, but I don’t have a key seater in my wood shop.

We will sell replacement parts and we will warranty most stuff except the stones if they’ve just worn out over a long time or if you drive a tank over the machine.

-Clay

[Author]

Posts