Advanced Search

All the threads and screws getting loose during sharpening

Recent › Forums › Main Forum › All the threads and screws getting loose during sharpening

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 10/13/2019 at 6:48 am #52356
    Michal
    Participant
    • Topics: 1
    • Replies: 0

    Wicked Edge Pro-Pack III sharpening system 2018
    <p style=”text-align: left;”>All the threads and screws getting loose during sharpening. It is very annoying. I did try so many times and I don’t want to use  Pliers. Thanks in advance for suggestions.</p>

    10/13/2019 at 7:28 am #52357
    airscapes
    Participant
    • Topics: 20
    • Replies: 369

    There are a couple of threads on this subject but  try wiggling the bracket as you tighten the thumb screws.  The end of the shaft has a point on it that matches the tapered hole in the bar.  If you are not centered just right, it comes loose.

    1 user thanked author for this post.
    Brewbear
    10/13/2019 at 12:15 pm #52359
    tcmeyer
    Participant
    • Topics: 38
    • Replies: 2098

    Hi Michael:  Can you please explain which model you have and which screws are coming loose on you?  Marc addressed those screws which are known to come loose, but you say “all the threads and screws getting loose.”  Perhaps there’s something else happening here.

    2 users thanked author for this post.
    NotSharpEnuff, Brewbear
  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.