James

[James]

Ok, question on the diamond sprays, has anyone else had the problem of the leather swimming to not want to absorb or let the spray embed in it. Tried on my 4 micron strips and it like the leather had a water proofing on it. Some spots took, others I let the spray sit on the same spot for minutes and it never dried or embedded

[James]

No matter how light I apply the paste, or how long ago, i always seem to get flakes.

[James]

Thanks for the help. I sanded them with 400 grit, cleaned with alcohol, let dry and tried applying the paste as light and even as I could. Always felt like the leather didnt accept it very well.

[James]

These are my strops. Like I said , I’m new to stropping and am pretty sure that I’ve done something wrong.

Attachments:

You must be logged in to access attached files.

[James]

Marc, you seem to be the man with all the answers I’ve been looking for. I plan to clean the aluminum and lap it at work (welder in a machine shop). When I saw WE didnt recommend using the aluminum my first thought was acidic nature of the adhesive. If that’s the case, I’d peel off the aluminum and replace with 300 series stainless.

[James]

Wow, lots of info to digest. I will post some pictures tonight of the strops to see what ya’ll think. It is very possible I’m using the wrong technique.

2 users thanked author for this post.

Organic, Marc H

[James]

So I have my Spyderco Dragonfly sharpened to 13.5°. I can’t lower my angle any more for stropping. I have been stripping down to .06 microns and have had great results. What is the reasoning behind changing angle for stropping. I’m new to the concept.

Attachments:

You must be logged in to access attached files.

[Author]

Posts