Aleksei Dyachkov

[Aleksei Dyachkov]

Good question. I’ve mentioned it to our factory and it’s easy enough to do. I need to find a good draftsman to make the drawings to send off.

I’ve sent to you original 3d-model a while ago. Could you make anything out of it ?

[Aleksei Dyachkov]

I found out that reversing the arms so the bolts are on the flat side of the rod somehow helped with the same issue. The con is that it’s a bit more tricky to set up an angle.

[Aleksei Dyachkov]

🙁 I was about to order the Micro Fine Ceramics Stones Pack,added to the cart and when check the shipping charges to Puerto Rico even when we are US Territory and received all the packages via USPS like everybody in the US, the charges were $17.75 for USPS Priority Mail when locally a package like that one will only cost around $9.00 US with tracking. I really opted to look for those stones someplace else….

Sometimes our site is a little wacko with shipping prices and we’re still working on it. If you call in toll free (877) 616-9911 or email the main office: info@wickededgeusa.com we can arrange shipping at a much better price.[/quote]

Only shipping option it gave me was UPS Worldwide Expedited SM ($263.46)
That’s not a little wacko 😉
I wrote You, too.

[Aleksei Dyachkov]

Great idea, Aleksei…..and excellent renderings too!

Thanks.

Yea, more accessories to spend my money on!

If mass-produced, they should be cheap as dirt — the mould is expensive, the plastic isn’t.

[Aleksei Dyachkov]

Will you send me the DXF file? If so, I’ll see what I can do with it.

Done.
Sorry for delay.

[Aleksei Dyachkov]

Nice idea, beautiful rendering! Thank you for sharing it. Did you make your sketch to the specs of the handles and strops?

Thank You.

I didn’t use specs, It’s just a 10 minute sketch =).

I can measure sizes & make it “fit” , but the model itself will be of no use, because it’s not made in CAD, just ordinary 3D software. It has option to export to DXF file to use with AutoCAD or other CAD application, but i’m not quite sure if it’ll work fine,

[Aleksei Dyachkov]

Name Alexey ( or just Al ).
Living in St.Petersburg, Russia (Yeah, vodka, bears & nukes )
Senior software developer, a bit of Al Mar knife collector.
Wanted an upgrade for my Lansky+Triangle, for sharpening my & my freinds knives.
Finally got my ProPack 1 today, just ran my current EDC through it.
Even I haven’t got hair-wiggling edge from scratch I’m totally happy with the result, as I could get very nice biting edge with no experience with the system. So I’ll just sharpen more, and slowly progress to mirror finish & hair-wiggling.

[Aleksei Dyachkov]

Thanks, I’ll try that.

[Author]

Posts