Advanced Search

RTAK II Suggestions

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #29457
    Citadel99
    Participant
    • Topics: 4
    • Replies: 6

    All,

    What are your thoughts on sharpening a RTAK II?  Long knife, not sure it’ll work in one stroke.  Also, what angle (the database is down now…)

    Mark

    #29460
    tcmeyer
    Participant
    • Topics: 38
    • Replies: 2098

    I don’t think you’ll have any problems dealing with the blade length.  Mount the knife with the belly a little closer to the vise than just centered.  If the belly is too far forward, you’ll see a change in bevel angle at the tip.   Look at the videos describing “finding the sweet spot.”  I’ve been sharpening a 12″ jerky knife without problems, but it’s just a straight edge with no belly to deal with.

    If you intend to baton the knife, as with camp chores, you might be better off to use a more obtuse angle – maybe 22 to 25 dps, so the edge stands up to the abuse.

    #29467
    Josh
    Participant
    • Topics: 89
    • Replies: 1672

    I don’t do knives that large on my WEPS unless I set the edge angle on a belt sander first and then micro bevel on the WE. The edge angle will vary too much w/ a blade that long and a bevel that wide in my experience.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.