First Use!

[Marc H]

There are micro-angle adjusters available for the both the Gen 3 Pro and the WE130 models.  I have the adjusters on my Gen 3 Pro, pictured above.

I’m already ahead of you.  See email.

Thanks

Marc
(MarcH's Rack-Its)

[Chefy]

Thanks Marc

1 user thanked author for this post.

Marc H

[NotSharpEnuff]

Chefy, send me a message with your email and I’ll send you all the information.

Ed K.

1 user thanked author for this post.

motmefrinetle

[000Robert]

I have the stainless steel micro-adjusters and I love them!

1 user thanked author for this post.

motmefrinetle

[Chefy]

I’m guessing they’re more resistant to coming lose than the stock version?

 

[000Robert]

Yes, they are. Anytime I buy things like this I sand the screw ends and things like that just to make sure that it doesn’t become a problem. So I didn’t have the loosening problems that others have had.

But I received my Chisel Attachment several days ago. When I started sharpening a chisel, I would sometimes hit the lower stone stop pretty good and jar the L-Bracket. I noticed that the L-Bracket screw was loosening up on me. So after I locked the screw back down, I also locked down the L-Screw that came with the SS micro-adjusters. The L-Screw stayed tight and the L-Bracket didn’t move even though I bumped it a bunch of times.

[Chefy]

Thanks Robert, I’m learning 🙂

[000Robert]

You’re welcome. I’m learning too. And I’m pretty hard-headed! 😁

[Author]

Posts