Edge angle and finish?

Bump – I would like to know.

I am getting ready to sharpen a 6″ Doug Ritter MK2. This is a high flat grind that is nearly 5mm thick. The factory edge is pretty uniform. I am guessing about 20 deg. per side. Steel on this knife is 1095. As this is a field knife my goals are to not have to sharpen it, roll edges or chip out. Therefore I am willing to go a little more obtuse than I normally sharpen too.

Not sure which Leo you are addressing ; virtuovice has some interesting solutions although they are done freehand on Shaptons & Choseras for feather sticks and battening he favours a high convex thin on the left side (if you are right handed ) culminating in a convex bevel the (say 18Ëš)(right side bevel say 27Ëš) other side has a flatter grind with a high angle convex bevel so sharpened a little like a chisel edges knife.
The idea is that the blade stays shallow when feather sticking or when taking meat off the bone since the convex edge and grind allows the edge to stay shallow or in the case of bone it will tend to not dig in.
The total sum of the bevel angle should still equal that of at least 45Ëš( since this has been done on bench stones the angles are ball park not absolute but left side has much more curve than the right side and the bevel is asymmetric). If the bevels chip too easily then steepen them !
I have not tried this on bone since I do not hunt but it feather sticks well. It was a very blunt knife when I got it and it is very sharp I could do more for the aesthetics of it but it is a working knife Chinese made Boker D2 steel.

Leo (Mitch)

This is clear. How long does this take you, compared to just putting a single bevel and stropping “normal”? Sounds like a lot more work, but I have never done a convex. How long does it take to cut the next 2 angles, and how long to blend with the strops.

For me this knife is a knife I just keep in the backpack as knife#2, as I feel like I should always take 2 knives into the field. While hiking I don’t cut much and when I do I reach for the pocket knife as the sheath knife is in the pack rather than on me.

That being said I am looking at replacing the Ritter Mk2 (6″ and heavy) with an ESEE 4 for a fixed blade hiking knife. So I might wear the ESEE as it is not too big.

Actually my friends call me Mitch so maybe that would be best for ending any Leo confusion. I am the eldest too at nearly 79. I think Leo Barr is rather younger. So perhaps I will sign myself off as Mitch from now on.

best regards
Mitch

Since you are senior to me I am 56 this year you sign off as Leo & I shall sign off as Leo Nav since I quite like that !!

Leo (Mitch)

This is clear. Just remember the whole process after the main bevel takes little time with softly caressing strokes of the paddles. LOL! Make love to your blade so to speak.

Leo

Make love; not swarf.

Actually my friends call me Mitch so maybe that would be best for ending any Leo confusion. I am the eldest too at nearly 79. I think Leo Barr is rather younger. So perhaps I will sign myself off as Mitch from now on.

best regards
Mitch

Funny how you picture someone in your head? By your style and different chats we have had on the forum? I always figured you for 35-40 years old. You have a very young style Mr Mitch :woohoo:[/quote]

Eamon, I would wager that you would be further surprised to find out that I am a mere 5 foot 5 inches tall in the morning on a good day, I have a white beard, I have been mostly inactive for the past 5 years due to my health so I am way heavy and look kind of like a Greek Santa Clause…I am of Greek descent…Leonidas Mihelakos at your service. I used to be able to lift double my body weight in the clean and jerk when I weighed 119 pounds many years ago, but now I couldn’t roll it across the floor.
I am lucky now that I have a forest across the street from my new house, so my 11 year old grandson and I can get out and do things providing we move slowly and I don’t try to rush. There I can teach him how to make fuzz sticks and how to build a fire using a fire stick of magnesium and a striker with a bit of fluff from our dryer as super kindling and how to use a compass for map reading. He is now learning how to use the WEPS so he can look after the knives he will inherit from me. His favourite knife is a Bark River Gunny and the knife that scares him most is my Fairbairn-Sykes custom made commando fighter…it looks just like what it was designed to do and he is a gentle boy.
Funny eh, the way we think people will look seldom matches the truth of the matter.Read my short biography on the welcome column for maybe a clearer picture.

Cheers
Leo