Carbon Fiber Guide Rods
- This topic has 5 replies, 5 voices, and was last updated 05/06/2024 at 7:15 am by
.
-
Gary, I’m using one of a couple sets that are being prototype tested now:
https://www.facebook.com/share/v/gSi2Muj2REi8CkQp/?mibextid=oFDknk
Marc
(MarcH's Rack-Its)1 user thanked author for this post.
Mcmaster Carr sells carbon fiber rods which you could thread yourself if you get a 1/4″-28 die and die handle.
Carbon fiber rods are quite expensive at $50 plus shipping for a 48″ length.They also sell rods in Garolite, which I believe is the equivalent of G10 and has some lubricity to it. It sells for $16 per 48″ rod.
I made my rods from precision stainless rods and I have two sets: one at about 11″ and another at 18″ for when I double-stack my low angle adapters to sharpen my Japanese knives to 8 dps. You only need three or move turns of the thread. A few more if you want to use a jam nut.
On second thought, I don’t know how stiff Garolite would be.
1 user thanked author for this post.
https://www.printed3d.net/store/p/carbon-fiber-guide-rods
if you want to purchases a set here is a link to my website. I make them
1 user thanked author for this post.
- You must be logged in to reply to this topic.