New 2017 WE130 in Lancaster, Ohio
- This topic has 8 replies, 4 voices, and was last updated 12/20/2017 at 6:46 am by
.
-
I believe this may help: Knowledge Base Article and try this Video or Go to You Tube and search “wicked edge finding the sweet spot”. Sounds like you got a Pro Pack…enjoy it!
Welcome to the Forum and WE Shannon
Marc
(MarcH's Rack-Its)2 users thanked author for this post.
Welcome to the forum, Shannon! Great your first edges come out so well already. The knowledge base article Marc links to is indeed useful. If you want to check out the entire knowledge base, you can click on the link at the top right corner of this page.
Molecule Polishing: my blog about sharpening with the Wicked Edge
1 user thanked author for this post.
One little trick I’ve come up with (likely other’s have as well – doubt I’ll think of anything that hasn’t already been thought of) is to use a sandwich bag as a dust shield for folders. By carefully piercing the bottom corner with the blade, then wrapping the rest from the pivot back, forms a nice protective environment for the handle/pivot. I actually use a shrink wrap setup I have at work to form the “baggie”, then very lightly shrink the film with a heat gun so it isn’t bulky (not nearly enough to heat the knife). I’d imagine a hair dryer and sandwich bag would do the same thing.
3 users thanked author for this post.
Shannon, welcome to the Wicked Edge Forum. You’re the first to suggest this method, (in my experience on this forum.) Thanks for contributing. It’s always great to get a new perspective!
Marc
(MarcH's Rack-Its)1 user thanked author for this post.
Yeah, I’ve never heard of this method either. I have heard of people using magnets to attract the steel dust that comes off knives. Thanks, Shannon!
Molecule Polishing: my blog about sharpening with the Wicked Edge
1 user thanked author for this post.
Shannon: Welcome aboard and many thanks for contributing ideas like this. It’s amazing how such a specific topic can continue to draw so many variations in methods and equipment mods from the participants.
This is a special forum, I think, in that all of the participants stay on agenda and keep the dialogue positive; never argumentative. Everyone seems to want to contribute something. I’ve always had a passion for teaching and this forum helps to satisfy my needs – a good reason why I’ve stayed around for more than six years. Continued queries and input from others provides the seeds to keep the machine churning out ideas and answers.
I’d like to point out that this forum is what it is because of our host. Clay Allison is a businessman with a very progressive attitude. He lets us go down roads that would seem to be contrary to his best business interests, believing that keeping the dialogue open will eventually pay off in tangible and non-tangible ways.
Thanks guys.
1 user thanked author for this post.
Thought I’d show a picture of my “wrap” job on a 3″ XM18 Wharnie I sharpened yesterday.
Factory bevels were not symmetrical, one being about 23.3 degrees and the other at about 26.5 degrees. My 3.5″ spanto was about 50 degrees inclusive too, but closer to symmetrical. I set both sides on the 3″ Wharnie to 23 degrees, as I didn’t want to spend a lot of time reprofiling. It turned out pretty good. I’ll use it a while before I drop it down to 20 per side, which I eventually want to do to the 3.5″ spanto.
2 users thanked author for this post.
- You must be logged in to reply to this topic.