What I want is a riser and 1/4 jaw upgrade hopefully soon.
But this is my Current set up
With the riser I make, I suggest the 13" rods and a set of stone stops. The stops will prevent you going too high and coming down on the fresh bevel or going too low on a taller knife.
I have a built in stone rod holder if thats what you mean. So you make a riser for the obsidian? I also plan on getting the 13" rods too soon:)
Yes I do.. can see it here https://knife.wickededgeusa.com/forums/topic/we60-66-new-accessories/
thats awesome ill have to get with you this week end and see if i can get one that will fit the cam vise
Nice Setup!
So I added a another 1/2 base under the sharpener. I also got my high angle adapter and the 13" rods in. These are the changes I have made. I am planning to get the 1/4 jaw upgrade as soon as it drops
you may want to think about an angle cube if you don’t have one. Once your bevel is more than 5/8" above the vise, the numbers on the device are no longer accurate. I just didn’t see one in any of the photos so assume you do not have one.
Thanks Airscapes yes I have one. On a side note would it not be cool if the arms were digital.meaning you could see the angle on the sharpener.
If you are having trouble sharpening Daggers or other exotic blades this will let you sharpen anything even the smallest ones. The Tormek small knife adapter.