steve green

[steve green]

Ha! I joined Facebook just to access the link MarcH posted, and now it shows “Content not Available.”

[steve green]

That looks great, I’m very interested.

Steve

[steve green]

Any update on the D.R.O. ?

Thanks,

Steve

[steve green]

There you go! I’m not the least bit surprised you guys are already working on a fix.
Do you ever sleep?

It was good seeing you at the NJ show.

[steve green]

Hi juneau. Last I heard from Clay, the LAA won’t work with the Gen III. But, I’m far from official so maybe a message to Clay would be best.

[steve green]

Thanks Clay, see you there.

[steve green]

Damn, that looks great Clay. Any chance of seeing the Gen III Pro at ECCKS ? Have you got a ballpark on pricing?

Thank You,
Steve

[steve green]

Thanks, Steve B
I’m sure you’re right about the LAA.
.

Everyone at WEPS seems to be heavily invested in producing the best product they can.

I agree with you about this too. I’ve noticed it from the beginning.

[steve green]

I didn’t see it, but will this work with the Low Angle Adapter?

[steve green]

Right,…so update. Work in progress. Still no pics, DOH!
Razoredge very true, and helpful. Long time, I killed most of my day off. My wife wanted to know if it was some kind of therapy.
Thanks for the heads up about the 200 grit. Took forever, but cleaned up nicely.

I’m going to start another thread, just wanted to update this one first.The knife is sharp now, shaves hair. BUT, only where the Knife Maker brought the grind to an edge to start with.

Using the sharpie and magnification I found the only edge on the whole blade is at the belly. The heel of the blade is a dull, probably unintentional recurve, with an abrupt stop at the ricasso. The edge comes apart as the belly curves up to the point, leaving the knife pointless.

It’s a lot better, but I still have a couple of hours ahead of me.
Guys, thanks for the help.

[steve green]

Clay, what do you think about the square piece with the barstock/post to fit into a dedicated clamp (fly tying vise style). and a short sleeve in the granite base to hold the post when at home?

[steve green]

Thanks for the replies. Razoredge; I have a Micrometer, somewhere. Probably never find it. Re; going from 30-17dps, I doubt the Goniometer was getting an accurate reading. Could a fat convex throw it off? It’s designed for angles, not curves, right?

JamesBell, I know what you mean by “gutsy”, it sounds like a hacksaw on an iron bar. That’s why I stopped to get some advice. I knew going into this that 50 would have an effect on the finished edge, so I’m OK with that. The convex wasn’t working for me on this knife, otherwise I would be using the strops on it.

The blade is kind of beefy for 3.5 inches, at about 1/8″ thick.

[steve green]

Has anyone tried modifying the Vacuum/suction cup Panavise mounting plate to fit a simple clamp like on a Flytying Vise?
In other words taking the great looking baseplate from Changeofseasons design and attaching the bar stock for the Fly Tying Vise clamp.

Mounting Plate Plans here.

[Author]

Posts