Jacob
-
Jacob started the topic Spyderco Sage Series Clamping position in the forum Techniques and Sharpening Strategies 6 years, 11 months ago
<p style=”text-align: right;”>Google search has not turned anything up for me.</p>
This spydie hole in this knife creates some issues with clamping. Combined with the FFG I can’t figure out how to properly clamp it. It’s a short blade and the taper makes it really difficult to clamp without having most of the clamp on hole.Here is some pic…[Read more]
-
Jacob joined the group All Forum Members 6 years, 11 months ago
-
developer (ChrisB) and Jacob are now friends 6 years, 11 months ago
-
Jacob replied to the topic Why Wicked Edge? in the forum Getting Started 6 years, 11 months ago
Knife #3 is in the books. Again it was a $3 Walmart folder. Initially, I felt like this was my best one to date. I took my time and used light pressure. I felt like I could feel a difference and could tell when the stones were becoming smoother. Prior to stropping it felt extremely sharp. After sharpening it would sort of shave hair. I noticed…[Read more]
-
Jacob replied to the topic Why Wicked Edge? in the forum Getting Started 6 years, 11 months ago
I will check those out thanks!
Once you find a burr on both sides, how many alternating strokes do you do? I realize the answer is “it depends” but I’m trying to get a general idea. I haven’t quite developed a feel for when the scratch pattern changes.
-
Jacob replied to the topic Why Wicked Edge? in the forum Getting Started 6 years, 11 months ago
That was a great thread! Thanks!
Also I think I’m using too much pressure!
-
Jacob replied to the topic Why Wicked Edge? in the forum Getting Started 6 years, 11 months ago
I purchased the we120 and added the 800/1000 diamonds and the 5/3.5 strops.
This has been my method so far:
I’ve followed the factory bevels so far using the sharpie trick. I sharpen one side until I get a burr and then do the other side an equal amount of times and check for a burr on the opposite side. Once I have a burr on both sides I do a…[Read more]
-
Jacob replied to the topic Why Wicked Edge? in the forum Getting Started 6 years, 11 months ago
So I got my sharpener in and got it set up this weekend. So far I’ve been able to sharpen two knives.
The results have been underwhelming at this point. I know it’s me and not the sharpener. I think I need to go slower and do more strokes with each stone. They are getting sharp but even after the 1000 grit diamonds and the 5/3.5 strops it sti…[Read more]
-
Jacob replied to the topic Why Wicked Edge? in the forum Getting Started 6 years, 12 months ago
Thank you everyone for the input!
I pulled the proverbial trigger today and purchased the we120, 800/1000 and a 5/3.5 strop.
Im sure I’ll have a million questions once I get it but I’m super excited. There is definitely a sticker shock that comes with the intial purchase. I’m sure it’ll go away as soon as I receive it!
-
Jacob replied to the topic Why Wicked Edge? in the forum Getting Started 6 years, 12 months ago
I have a few Spyderco’s with ffg blades. Will the 130 be better for that?
-
Jacob replied to the topic Why Wicked Edge? in the forum Getting Started 6 years, 12 months ago
Thanks for the reply! I realized I should’ve given more background after I posted.
I own around ten edc knives, mostly folders and a few fixed blades. Most are s30v or better. In addition I have a bunch of kitchen knives.
Currently I have a Spyderco sharpmaker with diamond stones and the uf stones. In addition I have a stropman strop with g…[Read more]
-
Jacob started the topic Why Wicked Edge? in the forum Getting Started 6 years, 12 months ago
Okay guys and gals, I have been reading through forums, watching tons of videos and I am on the verge of buying a new sharpening system.
I tend to go by the buy once cry once motto but I’m not wealthy so I don’t like to waste money either.
If I’m honest im down to the KME and the wicked edge. So without talking bad about other sharpeners, why s…[Read more]
-
Jacob became a registered member 6 years, 12 months ago