Advanced Search

WEPS Vs “Chris” type blade

Recent Forums Main Forum Techniques and Sharpening Strategies WEPS Vs “Chris” type blade

This topic contains 1 reply, has 2 voices, and was last updated by  wickededge 08/30/2011 at 5:12 am.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #202

    Never Dull
    Participant
    • Topics: 3
    • Replies: 5

    Another question…. Received a wavy “Cris” (-10sp) type stilletto from a client today. I have the curved stones but this blade has no edge whatsoever. Would it destroy the mid grit curved stones attaining an edge? Do I just utilize the edge of the existing 100/200 and go from there to put an edge on this?

    #206

    wickededge
    Keymaster
    • Topics: 121
    • Replies: 2906

    I’ve sharpened a Kriss style blade before and I used the curved stones. Like yours, the knife had no edge at all. What I found was that the steel was incredibly soft and could not actually hold an edge. I got it much sharper than it was, but it was pretty futile. If the knife you’ve received is made from good steel, you can try riding the edges of your diamond stones to cut the initial bevels in and the refine them with the curved stones and then the strops.

    -Clay

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.