Advanced Search

WE66 Obsidian set up

Recent › Forums › Main Forum › WE66 Obsidian set up

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • 01/19/2023 at 5:53 pm #58365
    Shophand
    Participant
    • Topics: 1
    • Replies: 6

    What I want is a riser and 1/4 jaw upgrade hopefully soon.:) But this is my Current set up 🙂

    • This topic was modified 1 year, 11 months ago by Shophand.
    Attachments:
    1 user thanked author for this post.
    airscapes
    01/19/2023 at 6:05 pm #58369
    airscapes
    Participant
    • Topics: 20
    • Replies: 369

    With the riser I make, I suggest the 13″ rods and a set of stone stops.  The stops will prevent you going too high and coming down on the fresh bevel  or going too low on a taller knife.

    1 user thanked author for this post.
    Shophand
    01/19/2023 at 6:09 pm #58370
    Shophand
    Participant
    • Topics: 1
    • Replies: 6

    I have a built in stone rod holder if thats what you mean. So you make a riser for the obsidian? I also plan on getting the 13″ rods too soon:)

     

    01/19/2023 at 8:16 pm #58373
    airscapes
    Participant
    • Topics: 20
    • Replies: 369

    Yes I do.. can see it here https://knife.wickededgeusa.com/forums/topic/we60-66-new-accessories/

    1 user thanked author for this post.
    Shophand
    01/20/2023 at 5:10 am #58374
    Shophand
    Participant
    • Topics: 1
    • Replies: 6

    thats awesome ill have to get with you this week end and see if i can get one that will fit the cam vise 🙂

    01/20/2023 at 1:49 pm #58375
    Pinkfloyd
    Participant
    • Topics: 22
    • Replies: 208

    Nice Setup!

    1 user thanked author for this post.
    Shophand
    01/26/2023 at 6:57 pm #58383
    Shophand
    Participant
    • Topics: 1
    • Replies: 6

    So I added a another 1/2 base under the sharpener. I also got my high angle adapter and the 13″ rods in. These are the changes I have made. I am planning to get the 1/4 jaw upgrade as soon as it drops 🙂

    • This reply was modified 1 year, 10 months ago by Shophand.
    Attachments:
    01/27/2023 at 7:44 am #58386
    airscapes
    Participant
    • Topics: 20
    • Replies: 369

    you may want to think about an angle cube if you don’t have one.  Once your bevel is more than 5/8″ above the vise,  the numbers on the device are no longer accurate.  I just didn’t see one in any of the photos so assume you do not have one.

    1 user thanked author for this post.
    Shophand
    01/27/2023 at 8:11 am #58390
    Shophand
    Participant
    • Topics: 1
    • Replies: 6

    Thanks Airscapes yes I have one. On a side note would it not be cool if the arms were digital.meaning you could see the angle on the sharpener.

    01/30/2023 at 3:55 pm #58410
    Shophand
    Participant
    • Topics: 1
    • Replies: 6

    If you are having trouble sharpening Daggers or other exotic blades this will let you sharpen anything even the smallest ones. The Tormek small knife adapter.

    • This reply was modified 1 year, 10 months ago by Shophand.
    • This reply was modified 1 year, 10 months ago by Shophand.
    Attachments:
  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.