Spyderco tenacious – added sharpening choil
- This topic has 3 replies, 4 voices, and was last updated 10/03/2018 at 2:34 am by
.
Viewing 4 posts - 1 through 4 (of 4 total)
-
here is my spydie tenacious in FDE. I used it as practice adding a sharpening choil before I play with my para2. I used a triangle file to start the notch and then used a small bit on my dremmel on slow speed to remove most of the metal. Then used DMT diamond file to finish up.
1 user thanked author for this post.
That’ll work. Nice job.
Marc
(MarcH's Rack-Its)1 user thanked author for this post.
Viewing 4 posts - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.