Paramillitary help

This topic has 3 replies, 4 voices, and was last updated 08/22/2014 at 10:07 pm by JS.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
08/22/2014 at 6:16 am #20052
stephen floyd
Participant
- Topics: 1
- Replies: 3
So after I made my one bevel larger both sides set a 15 deg notch second holes on B I read clays video about filling the clamp is there anyway to even out what I have now thanks for any help.
Attachments:
- ImageUploadedByTapatalk1408673739.505982.jpg
- ImageUploadedByTapatalk1408673752.325613.jpg
08/22/2014 at 10:46 am #20057
tcmeyer
Participant
- Topics: 38
- Replies: 2098
If you check around, you find quite a bit on this subject. The uneven bevels seem to be pretty common in Spyderco FFG knives and they require special attention when clamping.

Check out this thread:
http://www.wickededgeusa.com/forum/6-techniques-and-sharpening-strategies/13084-bevel-angles

There’s lots more on this forum covering the same issue. Good luck and welcome aboard! There’s a lot of really good people here who will jump in to help you.
08/22/2014 at 11:50 am #20058
Mark76
Participant
- Topics: 179
- Replies: 2760
Hey Magnumfloyd, welcome to the forum! Enjoy your WEPS!

There are lots of resources for beginners that also include tips for mounting full flat ground blades. If you look under “Resources”, you find the FAQ and the Wiki that both cover FFG blades.

Success! And don’t hesitate to ask if you have more questions.

Molecule Polishing: my blog about sharpening with the Wicked Edge
08/22/2014 at 10:07 pm #20063
JS
Participant
- Topics: 7
- Replies: 109
Check out my post here: http://www.wickededgeusa.com/forum/9-basic-techniques-and-sharpening-strategies/13088-why-are-my-blades-tilted-in-the-clamp?start=10#18577

If you have any more questions, don’t hesitate to ask.
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.