Advanced Search

M390 Ok?

This topic contains 4 replies, has 4 voices, and was last updated by  jeff williams 09/15/2011 at 1:16 pm.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #379

    Carlos A Martinez
    Participant
    • Topics: 2
    • Replies: 3

    I just wanted to check and see if the Wicked Edge system could handle M390 Super Steel? Only reason I ask is because I’ve heard it destorys some other kits.

    I’m particularly looking to sharpen a Benchmade 581 Barrage

    Thanks for the help.

    #382

    Dan
    Participant
    • Topics: 0
    • Replies: 84

    It’s rated to sharpen ceramic blades, so it shouldn’t have any trouble at all with the M390.

    #386

    Carlos A Martinez
    Participant
    • Topics: 2
    • Replies: 3

    Thanks for the info. Looking forward to trying it out. I’ll make sure and update this post with my results.

    #405

    Dave Schur
    Participant
    • Topics: 7
    • Replies: 39

    I’ve done S90V on it without issue, so I imagine M390 is fine. The Diamond paddles can eat the crap out of anything when reprofiling,

    I did back down to the 50/80 paddles on the S90V for the first profile and burr though.

    #407

    jeff williams
    Participant
    • Topics: 1
    • Replies: 23

    CPM4 is no problem either

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.