Hello from England

This topic has 10 replies, 8 voices, and was last updated 08/07/2017 at 3:22 pm by jcr.

Viewing 11 posts - 1 through 11 (of 11 total)

Author

Posts
08/01/2017 at 1:34 pm #40434
jcr
Participant
- Topics: 1
- Replies: 3
hi everyone

i recently got myself a wicked edge after years of wanting one.

have sharpened a few knives and am quite pleased with the results.

i found a granite board to mount the system on, but its only 14mm thick and the mounting screws which came with the w/e are far too long to use. could someone advise me as to what size screws i need to get to mount the system to this base.

thank you

jason
08/01/2017 at 2:08 pm #40435
Anarchy84
Participant
- Topics: 5
- Replies: 61
Welcome to the forum, Jason!

I do not know the answer to your question. Hopefully one of the more knowledgeable folk can enlighten us.
08/01/2017 at 5:57 pm #40436
Mark76
Participant
- Topics: 179
- Replies: 2760
Welcome to the forum, Jason. You have just joined a great forum where people really want to help each other. So please don’t hesitate to ask any questions.

Molecule Polishing: my blog about sharpening with the Wicked Edge
08/01/2017 at 6:28 pm #40437
Marc H
Moderator
- Topics: 81
- Replies: 2754
jcr wrote:

I recently got myself a wicked edge after years of wanting one. I found a granite board to mount the system on, but its only 14mm thick and the mounting screws which came with the W/E are far too long to use. could someone advise me as to what size screws I need to get to mount the system to this base. Thank You, Jason

First I’d like to welcome you to the Forum, Jason. Which WE System are you using? This may help to answer your question. Hopefully someone will chime in with the screw thread size.

I don’t know the availability, to you, of screws with American standard threads so it may be easier for you to drill it out and tap it to metric thread screws, of a little larger size. That you should be able to get done, easy enough, in England, to solve your issue. The aluminum should tap easily. You might not even need to drill it out first, to tap it.

Marc
(MarcH's Rack-Its)
08/01/2017 at 9:25 pm #40439
Mikedoh
Moderator
- Topics: 38
- Replies: 571
Why not cut the screw shorter?

1 user thanked author for this post.

Dwight Glass
08/01/2017 at 11:27 pm #40440
jcr
Participant
- Topics: 1
- Replies: 3
Marc H wrote:

jcr wrote:

I recently got myself a wicked edge after years of wanting one. I found a granite board to mount the system on, but its only 14mm thick and the mounting screws which came with the W/E are far too long to use. could someone advise me as to what size screws I need to get to mount the system to this base. Thank You, Jason

First I’d like to welcome you to the Forum, Jason. Which WE System are you using? This may help to answer your question. Hopefully someone will chime in with the screw thread size.

thank you for the welcome everyone.

its the older type system i have. a w/e 100 with the non adjustable arms.
08/05/2017 at 11:54 am #40470
sksharp
Participant
- Topics: 9
- Replies: 408
Welcome jcr, hope someone can help with your problem. I don’t have that system so can’t help with the thread or size.
08/07/2017 at 11:45 am #40516
wickededge
Keymaster
- Topics: 123
- Replies: 2939
The mounting screws are #10-32 flat socket head cap screws. You need the threads to be at least the thickness of your base plus 1/4″ to engage with the holes in the sharpener.

-Clay

3 users thanked author for this post.

sksharp, jcr, Marc H
08/07/2017 at 12:52 pm #40518
Nick Middleton
Participant
- Topics: 0
- Replies: 7
If getting shorter screws is a problem, you could probably file-down the screws to remove the extra-length until they fit.
08/07/2017 at 3:21 pm #40531
jcr
Participant
- Topics: 1
- Replies: 3
Nick Middleton wrote:

If getting shorter screws is a problem, you could probably file-down the screws to remove the extra-length until they fit.

thank you.
08/07/2017 at 3:22 pm #40532
jcr
Participant
- Topics: 1
- Replies: 3
wickededge wrote:

The mounting screws are #10-32 flat socket head cap screws. You need the threads to be at least the thickness of your base plus 1/4″ to engage with the holes in the sharpener.

thank you.
Author

Posts