Advanced Search

Sweet Spot

Recent › Forums › Main Forum › Techniques and Sharpening Strategies › Basic Techniques and Sharpening Strategies › Sweet Spot

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 01/03/2017 at 9:53 pm #36475
    BarmanBean
    Participant
    • Topics: 6
    • Replies: 19

    OK.  New to the system and so far I’m basically just breaking in the stones on Ikea knives (these come amazingly sharp out of a package for about $5, but man the angles are intense and the steel is SOFT).

    Mostly messing with my 1k grit stones and finding sweet spots, mounting knives, etc.  First thing I’m noticing is small knives like a leatherman seem kind of impossible.  I expect to possibly upgrade to the ball joint arms with riser block eventually, maybe that will help.

    But finding the sweet spot, and the effects of finding this spot…I understand that failure to find this spot will result in visually uneven bevels.  Does this affect performance at all?  For example, if the tip visually has a different visual bevel, does it also have a different edge angle overall?

    Probably a noob question here, but there is surprisingly few videos out there that I can find on properly mounting knives in the WEPS, while there is comparatively a lot of videos showing actual sharpening techniques.

    01/04/2017 at 12:11 am #36477
    dulledge
    Participant
    • Topics: 12
    • Replies: 183

    I hope this post can help a bit or give ideas for further research

    https://knife.wickededgeusa.com/forums/topic/knife-mounting/#post-35734

    2 users thanked author for this post.
    BarmanBean, Mark76
    01/05/2017 at 6:43 am #36497
    Mark76
    Participant
    • Topics: 179
    • Replies: 2760

    This post may help too: https://www.wickededgeusa.com/finding-the-sweet-spot-positioning-your-knife-from-front-to-back/

    Molecule Polishing: my blog about sharpening with the Wicked Edge

    1 user thanked author for this post.
    dulledge
    01/05/2017 at 10:16 am #36505
    BarmanBean
    Participant
    • Topics: 6
    • Replies: 19

    Thanks guys.  I’ll continue to fiddle around with a sharpie and moving my knives around.  I have a 60x magnifier on the way that should help–it’s honestly quite hard to be sure that all the sharpie is being removed without some magnification (and probably better lighting overall).

    I did a couple shorter santoku knives (fairly flat edge profile) that turned out pretty well.  I think my stones are definitely still breaking in.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.