This one’s going to be fun!! wohooo!

This topic has 5 replies, 3 voices, and was last updated 09/06/2013 at 8:45 am by Josh.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
09/06/2013 at 4:02 am #14662
Josh
Participant
- Topics: 89
- Replies: 1672
I will have to document this one so others can see how it went lol. not sure I have seen a thread on this yet, so anyone done this type of dagger before? Any tips? Thinking about using double sided tapes in a “quad” pattern to fill in the gaps on both sides of the taper…
09/06/2013 at 7:14 am #14668
Daniel maloon
Participant
- Topics: 10
- Replies: 209
I think that will work. I’ve gotten one that looks smaller ?that I made L’s out of leather to ride the sides . Tape is probably a smarter way to go. Not much help as I don’t see to many
09/06/2013 at 7:28 am #14669
Josh
Participant
- Topics: 89
- Replies: 1672
Thanks for the input Dan… gonna tackle this beast tomorrow night… I actually have 2 of them. But the good news is that I’m charging $20 each, probably going to take some of that shoulder off with my belt sander first =)
09/06/2013 at 8:13 am #14674
Daniel maloon
Participant
- Topics: 10
- Replies: 209
$20 each is a good price you’re giving them. Has it been sharpened before it’s hard to tell im my phone
09/06/2013 at 8:42 am #14676
Eamon Mc Gowan
Participant
- Topics: 17
- Replies: 513
Josh I did a smaller set on the WE before my belt sander. Did it with the 50/80’s. It took forever! Came out fabulous, did I mention it took forever? If I was to do it again? I would start with the sander and finish with the WE.
Also I used a 1″ square of chamois and it worked out fine.
09/06/2013 at 8:45 am #14677
Josh
Participant
- Topics: 89
- Replies: 1672
Thanks Eamon! I will keep that in mind for sure!
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.