With the addition of the new upgraded Ball Joint arms i was finally able to sharpen my SOG Twitch II knife, with an edge that i am happy with. Woo Hoo! I couldnt do this knife before because the standard arms would let the hones hit the body of the knife and the thumb stud. This might help others that couldnt do a certain knife before
Thanks Guys,
Trying to post in Database but evidently im missing something, it wont let me post
Here are the knife specs
Blade Length
2.68" x .1"
Steel
AUS 8
HRC
57-58
Settings
Top Holes
22 deg
Will have to get back on the allignment
My progression was 800 to 1600 ceramics. Then 14, 10, 5, 3.5u strops. 100 strokes with each strop would flip strops end for end at 50 so the whole strop would get used instead of only about 2/3 of them being used.
Very cool, I’ve done quite a few SOG knives including the Flash series and the recurved Toothlock. I think I have the data for at least the latter of those and all the other name brand knives I’ve done recently up on the DB now. Clay might need to send me a hat by now
I’m sure I’ll run into a Twitch sooner or later, thanks for sharing!
[quote quote=“ApexGS” post=7531]Very cool, I’ve done quite a few SOG knives including the Flash series and the recurved Toothlock. I think I have the data for at least the latter of those and all the other name brand knives I’ve done recently up on the DB now. Clay might need to send me a hat by now
I’m sure I’ll run into a Twitch sooner or later, thanks for sharing![/quote]
You do have enough for a hat already Are you ready for one or do you want to stack up more credits for something else? I’ll bump the other thread that shows how many credits equals what swag.