John Paul

[John Paul]

Here is a photo of the top screw tightened and the jack screw all the way in.

Attachments:

You must be logged in to access attached files.

[John Paul]

When purchasing a $500 product I would expect to receive it with vise screws long enough to clamp standard folding knives and kitchen knives. If I can clamp them then what would the blade thickness need to be for proper clamping.  I ask that you send me the appropriate screws for my application free of charge.

[John Paul]

I got the same system a few days ago and noticed the same problem with mine. I have a blade stock of 0.140”  and tighten the top vise screw with the guide inserted in the lower holes (same issue with the lower holes).  When I try and tighten the jack screw it doesn’t make contact with the opposite jaw. I am having the same issue on my other folding knives.  I removed the screws to make sure that the longer one was in the jack screw position.  My lower jack screw is 3/4”.

• This reply was modified 3 years, 6 months ago by John Paul.

[Author]

Posts