Kevin Driscoll

[Kevin Driscoll]

I don’t know what happened to last night’s post, so here it is again.

Thanks for the replies. It was only on one side, and something just didn’t seem right. I just couldn’t get it right. Something told me that I had to bring it down. I carefully went across the edge with the 100, at 90 degrees. Then, when back to scrubbing. Hey, part of it was gone! So, I carefully repeated my actions.

After a short time, I’d removed the odd high spot, and was able to bring up a burr the whole length of the edge.

2 users thanked author for this post.

Brewbear, Dwight Glass

[Author]

Posts