jcr

[jcr]

wickededge wrote:

The mounting screws are #10-32 flat socket head cap screws. You need the threads to be at least the thickness of your base plus 1/4″ to engage with the holes in the sharpener.

thank you.

[jcr]

Nick Middleton wrote:

If getting shorter screws is a problem, you could probably file-down the screws to remove the extra-length until they fit.

thank you.

[jcr]

Marc H wrote:

jcr wrote:

I recently got myself a wicked edge after years of wanting one. I found a granite board to mount the system on, but its only 14mm thick and the mounting screws which came with the W/E are far too long to use. could someone advise me as to what size screws I need to get to mount the system to this base. Thank You, Jason

First I’d like to welcome you to the Forum, Jason. Which WE System are you using? This may help to answer your question. Hopefully someone will chime in with the screw thread size. 

thank you for the welcome everyone.

its the older type system i have. a w/e 100 with the non adjustable arms.

[Author]

Posts