Some things in life are predictable. I got back from vacation and thought that before I take a photo of the knife I would just touch it up. Doh!!! I did of course ruin the finish I put on. So, I’m busy stropping tonight and hope to get a photo up tomorrow.
Ed
Yes, I have a few of Alan Woods knives. The woodlore has a slight hollow grind on the Scandi edge and I really wanted to flatten it so it had a true flat grind. Let me just say it took a lot of time with the 100 grit stone to get the hollow grind flat! I think if I was going to do that again I would get a more aggressive stone. My 100 grit is quite smooth now!
As you say it’s about 1cm and so far I have a smooth polish on it and too be honest it’s not far from a mirror finish. I’m on vacation now but when I get back in a week I’ll posta photo of it.
Thanks Bruce. Checked with Angle and when I set the right hand paddle at 15 deg, as marked on the WE, I need to set the left at 16 deg to get the same angle.
Is there supposed to be any movement in the jaws when clamped ? I can get the jaws to swivel slightly when the knife is clamped.
