ColbyL
-
ColbyL replied to the topic Play in arms/stones in the forum Sharpener and Accessory Maintenance 3 years, 12 months ago
Wow Robert those are some nice add ons! I will keep those in mind as I go down the rabbit hole… For now I am planning on cutting the fingers off some disposable gloves and put them over the ball joints. I am curious about your stones. Are those covers on them? I am trying to figure out the best way to store mine and was considering putt…[Read more]
-
ColbyL replied to the topic Play in arms/stones in the forum Sharpener and Accessory Maintenance 3 years, 12 months ago
My arms are .253 according to my calipers so I think I am within spec there. I called Wicked Edge and they are sending me new joints (impressive customer service as I had heard).
I am interested in seeing the new joints. The ones I have now seem a little worse for the wear. There are some gouges in the face of one of them almost like they ha…[Read more]
-
ColbyL replied to the topic Play in arms/stones in the forum Sharpener and Accessory Maintenance 3 years, 12 months ago
OK thank you Robert and Marc, I thought that seemed like a lot of movement in those joints. They are both equally bad. I will call support and discuss with them.
Regarding the stones on the arms. Here is a video, with audio, of the movement I am getting on those. Its roughly the same on both arms with all the stones.
-
ColbyL replied to the topic Play in arms/stones in the forum Sharpener and Accessory Maintenance 3 years, 12 months ago
Thank you for the reply Marc. I did purchase directly from Wicked Edge. I bought the WE130 and some extra stones. I think this picture should get you everything requested. Let me know if you need another angle.
-
ColbyL started the topic Play in arms/stones in the forum Sharpener and Accessory Maintenance 3 years, 12 months ago
Hi All –
First off if this is in the wrong sub forum please move it appropriately.
I received my new WE130 over the weekend. I am wondering what an acceptable level of play is in the ball joints combined with the slop in the paddles. I can get up to half a degree of variance due to movement of the arm/ball joint and the oversized holes in the…[Read more]
-
ColbyL became a registered member 3 years, 12 months ago