Brandon

[Brandon]

Thank you.  This was corrected by moving the blade a little back in the clamp as well as the motions mentioned by tcmeyer!

1 user thanked author for this post.

tcmeyer

[Brandon]

No missing paint from the vise (aside from previous accidents) haha.  I will try moving the blade in the vise and resharpening.

[Brandon]

Yeah the thumb stud is not being touched by the stones.  Before sharpening it was perfectly straight.  I do have the thumb stud right up against the one side of the clamp as far as “location of clamping”. Yes the burr is forming on both sides.

• This reply was modified 4 years, 11 months ago by Brandon.

[Author]

Posts