B Berger

[B Berger]

Leo,

I appreciate your explanation, but would also like further clarification.

You stated: “the stamped side that is if laid flat handle to the left & the blade to the right edge facing you then this is the side to do 70 and the other side 30 for right handed people”

Does this mean that the side of the bevel facing the user (Superior/top view) is the side that gets 70? or is it the side of the bevel that is touching the table (inferior/bottom view)? What angle does the top get, and what angle does the bottom get with the blade to the right and handle on the left?

I’ve been trying to find the answer to this question for weeks!

Thanks!

[B Berger]

Thanks for the info! Let us know what you hear back from them regarding angles and ratios! thanks!

[B Berger]

Hi Gents,

Enjoyed reading your posts on this thread.

I have a similar inquiry….

I have two Mac’s – MTH 80 (8″) and the MSK-65 (6.5″)

What I am trying to figure out is:

1. Would these knives be best for a 70/30 profile?
2. If so, what angle goes on which side?
3. What angles specifically (in degrees)?
4. When giving angles, specify from which perspective (in the vise or in hand) you are assigning to Left and Right sides, please!

Thank you all so much!

Best wishes.

[Author]

Posts