Side Project: Knife Build #2 (Part 2)
- This topic has 2 replies, 3 voices, and was last updated 01/30/2016 at 5:34 pm by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Cleaned up the blade, satin finished the primary grind but left the “rougher” original steel look on the flats(you can still see the blown out edge at the bottom as well)
Cut handle scales out of mango wood, pinned & glued.
Rounded and sanded the handle…alot.
And viola! A finished knife…actually there were a few more steps but limited to 4 pics per post I guess.
Knife was clamped and Wicked Edged at 14dps down to 2000 grit lapping film and 5/3.5u leather strops.
3 users thanked author for this post.
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.