Scratching vice
- This topic has 1 reply, 2 voices, and was last updated 01/01/2017 at 7:36 am by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Probably not doing anything wrong, this is common when you sharpen very narrow knives. The blade edge is too close to the top edge of the vise. For these situations there are a few solutions; the Wicked Edge Low Angle Adapter and the Tormek Small Knife Adapter. Each holds the edge higher above the vise. Those of us who are serious knife sharpeners or are just plain obsessed about it eventually end up with both. We also have scratches on our vises.
1 user thanked author for this post.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.