Home Brew 3M Film 15u-.0.3u Plates

[BassLake Dan]

Hope this helps:
(Click on the link parts below to see the video series composed of three parts)

part 1

part 2

part 3

For a complete discussion of 3M Lapping films see here

[Josh]

Thanks Dan!! This is great info!!! I think I will definitely have to try this out 🙂

[Mark76]

Managed to miss it the first time, but this is very handy info. Thanks a lot!

Molecule Polishing: my blog about sharpening with the Wicked Edge

[Josh]

Can you post a link of where you get the lapping film? Curious about that…

[Mark76]

There’s a topic on it here.

Molecule Polishing: my blog about sharpening with the Wicked Edge

[Josh]

Thanks! I think I may try those PSA alum ox lapping films in the link that Leo provided… but I am trying to get in touch with Ken as he said that he has some diamond lapping film. Would be interesting, especially if you wanted to be able to sharpen ceramic knives as discussed in another thread on here.

[BassLake Dan]

.. but I am trying to get in touch with Ken as he said that he has some diamond lapping film. Would be interesting, especially if you wanted to be able to sharpen ceramic knives as discussed in another thread on here.

Josh,

If you can get the films from Ken then that is the way to go. 3M is the OEM supplier for most of these materials, but dealing with them is a *known nightmare* ….If you want to try your luck at 3M directly then:
here is a link[/url] you can try… good luck !

[Author]

Posts