Advanced Search

Drill collar variation

Recent › Forums › Main Forum › Product Announcements › Drill collar variation

Viewing 5 posts - 46 through 50 (of 50 total)
1 2 3 4
  • Author
    Posts
  • 03/13/2013 at 12:52 am #10197
    cbwx34
    Participant
    • Topics: 57
    • Replies: 1505

    You’re welcome. Your pictures demonstrate the concept well, so I just wanted to make sure that it was easy to see the whole set.

    03/13/2013 at 1:02 am #10199
    Bill Sutherland
    Participant
    • Topics: 9
    • Replies: 31

    I did find by using my dial Calipers I could get the exact measurement of the Stone/Paddle and then use the Calipers to set the exact distance rather than trying to fit the Stone/Paddle between the Stop Collar and L Bracket. It was actually much faster and “right on” accurate.

    03/13/2013 at 1:18 am #10201
    cbwx34
    Participant
    • Topics: 57
    • Replies: 1505

    That’s a good idea too. I’ve sorta come up with a concept for a way to do this that would (hopefully) make it easier then fitting the stone where you did (which by the way, is the best location I found too)… but haven’t had a chance to work on it… and find the parts to build it.

    Edit: p.s. As you can tell, I’m excited that someone did this. 😛

    03/13/2013 at 2:44 am #10205
    Bill Sutherland
    Participant
    • Topics: 9
    • Replies: 31

    Being able to utilize stones from the EP greatly expands the usefullness of both machines. I think I may have a way to use the paddles on the EP to.

    03/13/2013 at 2:54 am #10206
    Mikedoh
    Moderator
    • Topics: 38
    • Replies: 571

    Many thanks for your pictures and explanation Bill.
    Curtis, thanks for your aid with the visual aids!

  • Author
    Posts
Viewing 5 posts - 46 through 50 (of 50 total)
1 2 3 4
  • You must be logged in to reply to this topic.