Chisel Attachment

[wickededge]

I’m really excited to release this new attachment. It’s in the final stages of design with only one slight modification to be made. I’ve used the prototype and it works tremendously well:

Attachments:

• Pro2withChiselAssm.68.jpg
• Pro2withChiselAssm.69.jpg
• Pro2withChiselAssm.73.jpg

-Clay

[cbwx34]

Looks good! Does the bottom piece help square it up, set a depth, or just hold it in place? (Don’t know much about chisel sharpening).

[wickededge]

Looks good! Does the bottom piece help square it up, set a depth, or just hold it in place? (Don’t know much about chisel sharpening).

The bottom piece, or gate, is the stop for the chisel tip so it’s repeatable. The chisel rests there while the vise is tightened on the sides and then the gate slides out of the way providing access to the blade for sharpening.

-Clay

[Ken Buzbee]

Very cool, Clay. I like this a lot!

Ken

[Eamon Mc Gowan]

Don’t know much about chisel sharpening.

Curtis it looks like we better learn? :unsure: It appears that we are going in the chisel business :woohoo:
All we need now is to know how much to charge? 😆

[Jed Bowen]

Clay
Very slick setup there. I may have to see if I have any customers at the farmers market who would need some chisels sharpened. I keep mine sharpened up on wet stones, but this may help some other chisels that would have taken way too long on the wet stones. I have the 50/80 grit stones that could really do some good material removal on some jacked up chisels I have seen over the years. I will have to get this soon and I can not wait for that serration sharpener to come out too. Keep up the good work and the great designs. Any guess to the cost of this attachment or the serrated sharpener?
Thank you
Jed

[Jende Industries]

Looks awesome!!! Yet another great innovation! :cheer:

[Bob]

Will this open far enough to hold the blade from a wood plane?

[wickededge]

Will this open far enough to hold the blade from a wood plane?

How far are you needing it to go?

-Clay

[Tom Whittington]

Very cool! I wish I had the funds to get more WEPS stuff and attachments like this, but I’ve got enough going on with the shop as it is 🙂 I’m definitely looking forward to the scissors and serrated blade stuff in the future, I think those will take precedence for me over the chisel attachment initially… but I plan to get all of them someday!

[Mark Massie]

Clay,

Any projections on the availability of the lower angle device and the paddle stop device.

Thanks,

Mark

[wickededge]

Clay,

Any projections on the availability of the lower angle device and the paddle stop device.

Thanks,

Mark

Good question! We should have the lower angle device in about 3 weeks and the S.W.A.T. jig in about 4.

-Clay

[Mikedoh]

Aren’t wood plane blades ~ 2 inches wide?

[wickededge]

Aren’t wood plane blades ~ 2 inches wide?

That sounds about right. The chisel attachment opens to 3.5″

-Clay

[Phil Pasteur]

🙂
😛
Bring it on..

[Author]

Posts