Advanced Search

WEPS Dimensions

Recent › Forums › Main Forum › Getting Started › WEPS Dimensions

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 11/03/2015 at 6:51 am #29338
    developer (ChrisB)
    Keymaster
    • Topics: 53
    • Replies: 263

    I am away from home and need to find out the measurements (Height/Width/Depth) of the WEPS with the PP2 upgrade. If anyone can help I would greatly appreciate it. Thanks.

    Working to make knife.wickededgeusa.com a great forum!

    11/03/2015 at 11:05 pm #29342
    Mark76
    Participant
    • Topics: 179
    • Replies: 2760

    What dimensions do you need, MesaCranker?

    I made some measurements on my PP2 WE.

    • – The vice is about 14 cm high including the low angle adapter.
    • – The LAA itself is about 2.5 cm high
    • – The stock rods are about 23 cm long, when measured up till and including the ball joints
    • – The bar with the angle marks is about 28 cm long
    • – The blue base that holds the vice is about 28 cm long
    • – I don’t know the measurements for the entire bases are, since I made my own base

    Molecule Polishing: my blog about sharpening with the Wicked Edge

    11/05/2015 at 12:50 am #29348
    wickededge
    Keymaster
    • Topics: 123
    • Replies: 2940

    I am away from home and need to find out the measurements (Height/Width/Depth) of the WEPS with the PP2 upgrade. If anyone can help I would greatly appreciate it. Thanks.

    Pro-Pack II without Granite Base
    11″ (degree bar) x 5-3/4″ (blue base) x 5-5/8″ (height to top of Vise Jaw)
    Weight (without stones) approx 3 lbs

    Pro-Pack II with Granite Base
    12″ x 10″ x 6-3/4″
    Weight (without stones) approx 18 lbs

    Shipping dimensions and weight
    14″x12″x12″
    Weight (with stones) 25 lbs

    -Clay

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.