WEPS Dimensions

[developer (ChrisB)]

I am away from home and need to find out the measurements (Height/Width/Depth) of the WEPS with the PP2 upgrade. If anyone can help I would greatly appreciate it. Thanks.

Working to make knife.wickededgeusa.com a great forum!

[Mark76]

What dimensions do you need, MesaCranker?

I made some measurements on my PP2 WE.

• – The vice is about 14 cm high including the low angle adapter.
• – The LAA itself is about 2.5 cm high
• – The stock rods are about 23 cm long, when measured up till and including the ball joints
• – The bar with the angle marks is about 28 cm long
• – The blue base that holds the vice is about 28 cm long
• – I don’t know the measurements for the entire bases are, since I made my own base

Molecule Polishing: my blog about sharpening with the Wicked Edge

[wickededge]

I am away from home and need to find out the measurements (Height/Width/Depth) of the WEPS with the PP2 upgrade. If anyone can help I would greatly appreciate it. Thanks.

Pro-Pack II without Granite Base
11″ (degree bar) x 5-3/4″ (blue base) x 5-5/8″ (height to top of Vise Jaw)
Weight (without stones) approx 3 lbs

Pro-Pack II with Granite Base
12″ x 10″ x 6-3/4″
Weight (without stones) approx 18 lbs

Shipping dimensions and weight
14″x12″x12″
Weight (with stones) 25 lbs

-Clay

[Author]

Posts