Clay,
Take a look at the photo comparison Billabong posted. There seems to be a difference in your arm brackets and mine. It appears that yours are longer on the bottom, allowing for wider angles. I’m sure this is where the difference in angles is coming from.
Was the upgrade I received last week was supposed to have the longer brackets as shown in your photos?
I think either replacing the brackets or making a longer angle bar would solve the problem. I hesitate to go out beyond the small indents on the angle bar because the bracket screws don’t feel like they’re “biting” into the aluminum bar and could easily become loose. Whereas, with the indents, the bracket screws feel very secure and the brackets don’t loosen up as easy.
Have you thought about making a longer angle bar with indents along the entire side to accommodate a wider range of angles as well as keeping the bracket screws tight and secure?
I’d be happy to use the same angle brackets that you’re using and/or try a longer angle bar.
Thank you.
Jim
