I used an expanded earlier version of Pro-Pack II for at least 5 years until my home burnt to the ground. The unit was in the portion of the basement that was heavily watered by the fire department and the granite base survived. All of my knives were lost except a new Hinderer, which miraculously survived.
When we rebuilt I purchased 11 pieces of Shun Premier knives. Over the past 2 years most of them had dulled significantly, so it was time to get Wicked Edge again. This time I went for the much upgraded WE130 and attached it to the granite base. I added the 800-1000, 1500-glass platen (6 micron diamond lapping film), double glass platen (3 and 1.5 micron diamond lapping film).
I sharpened the Hinderer and a few junk knives to clean up the new stones before beginning. After some brief experimentation, I began using the 800 to form the burr on the Shuns. Beginning with the paring knives I worked my way through the chef and carving knives… all at 16°. I was astounded at the edge I ended up with, as least as good as they were when new. It was as if I’d never had a break from the Wicked Edge. It was well worth the cost of the new investment.
BTW… I couldn’t seem to use my old persona, so I’m beginning with a new one.
